Manual Kenwood km 250 (page 5 of 40) (English, German, Dutch, French)

380329

Zoom out

Zoom in

1/40

Assembling Bowl and Attachments Cont...

To fit attachments to the beater

socket, raise the mixer head.

Gently slide the attachment into

the outlet turning slowly in the

direction shown in the diagram,

until a stop is reached.

Press firmly upwards until the

attachment clicks into position.

To remove the attachment turn

clockwise until it is free to

withdraw.

Note

The 'K' beater and whisk were correctly set in the factory and should not need further adjustment.

If for any reason adjustment becomes necessary proceed as follows:

Disconnect mixer from mains supply.

Raise the head and insert beater/whisk attachment to be adjusted.

3. Hold the attachment and slacken nut with a suitable spanner (C).

Lower the head and rotate the attachment up or down the shaft (D). For best results the beater/whisk

should be as close to the base of the bowl as possible.

5. Raise the head and holding the attachment tighten the nut.

Hint

If when the machine is run, the

'K' beater knocks the bowl,

then adjustment is too low.

To remove the slow speed outlet

cover, pull the locking catch to

the side and pull off the cover.

Remove the juice extractor outlet

cover by either pressing down

and lifting free, or simply by lifting

free.

If a plastic plug is fitted,

unscrew this before fitting the

attachment.

Remove the high speed outlet

cover by lifting free.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood km 250 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood km 250 Manual

Product: