Manual Kenwood KM 070 (page 9 of 164) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

465350

Zoom out

Zoom in

1/164

ᕢ

ᕤ

the mixer

he mixing tools and some of their uses

-beater

●

or making cakes, biscuits, pastry, icing, fillings, éclairs and mashed

potato.

whisk

●

For eggs, cream, batters, fatless sponges, meringues, cheesecakes,

mousses, soufflés. Don’t use the whisk for heavy mixtures (e.g. creaming

at and sugar) - you could damage it.

ough hook

●

or yeast mixtures only.

high temperature flexible beater

●

Suitable for many cooking operations in particular cooking custards,

scrambled eggs and sauces. Ideal for scraping mixes both hot and cold

from the sides of the bowl during mixing. Also suitable to sauté vegetables.

tirring tool

●

uitable to use during cooking to maintain the consistency of food

e.g. chicken, fish, vegetables and fruit.

to use your mixer

efore using the mixer ensure the temperature and speed controls are

switched to the off ‘O’ positions.

1 Turn the head-lift lever clockwise

ᕡ and raise the mixer head until it locks.

to fit a tool 2 Place the tool in the socket, locating the shaft pin in the groove and then

turn to lock into position ᕢ.

tirring tool - to fit the stirring tool, insert the shaft into the socket, then

line up the slot on the extension so that it is located beneath the metal pin on

the underside of the mixer head. Hold the paddle and turn so that the shaft

pin is below the groove then push up and turn to lock into position

ᕣ.

3 Fit the bowl onto the base - press down and turn clockwise ᕤ.

4 To lower the mixer head, raise it slightly, then turn the head lift lever clockwise.

Lower into the locked position.

to remove a tool

●

Reverse step 2 above. (Always use oven gloves to remove tools after

cooking).

5 Connect the mixer to the power supply. The speed and temperature

indicator lights will illuminate briefly. The display will show and then

clear leaving the power on indicator illuminated .

6 Turn the speed control to the desired setting

(see page 10 for recommendations), the mixer will start and the speed

control indicator light will flash. The timer will count up in 1 second intervals.

The speed can be changed at any time whilst the mixer is operating.

7 Stop the mixer by returning the speed control to the off ‘O’ position.

Important - If at any time, the mixer head is raised during an operation,

the mixer will automatically stop and beep and it will not re-start when the

mixer head is lowered. To re-start the mixer turn the speed control to the

off ‘O’ position and then re-select a speed.

pulse button

The pulse button can only be used when the speed control is in the off ‘O’

position.

To select pulse, press the pulse button and the mixer will run at maximum

speed for as long as the button is held in this position. If the bowl contents

are above 60°C, the speed will increase gradually. This will be accompanied

by a beeping sound and the speed and temperature indicator lights will flash

quickly.

fold button

Press and release the fold button and the mixer will automatically

operate on minimum speed for 2 revolutions and then stop. The button

can be pressed for a longer operation or pressed repeatedly as needed to

combine ingredients.

Note: If the fold button is pressed whilst the motor is running it will perform

the standard fold function and then return to the selected speed.

ᕡ

ᕣ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KM 070 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood KM 070 Manual

Product: