706631
11
Zoom out
Zoom in
Previous page
1/327
Next page
before plugging in
l
Make sure your electricity supply is the same as
the one shown on the underside of your appliance.
l
This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
before using for the first time
l
Wash the parts: see ‘care and cleaning’.
key
1
outlet cover
2
dual drive outlet (medium and high speed)
3
interlocks
4
cord storage compartment
5
speed/pulse control
6
power unit
7
bowl tool socket
8
bowl
9
mixer head
bk
head release lever
bl
K-beater
bm
whisk
bn
spiral dough hook
bo
creaming beater (if supplied)
bp
splashguard
attachments
Not all of the attachments listed will
necessarily be included with your
kitchen machine. Attachments are
dependent upon the model variant.
bq
food processor (if supplied)
br
citrus juicer (if supplied)
bs
glass blender (if supplied)
bt
juice extractor (if supplied)
ck
food mincer (if supplied)
cl
pasta maker (accessory for food mincer) (if
supplied)
cm
compact chopper/grinder (if supplied)
Refer to the recommended speed chart for each
attachment.
the mixing tools and some of
their uses
bl
K-beater
l
For making cakes, biscuits, pastry, icing, fillings,
éclairs and mashed potato.
bm
whisk
l
For eggs, cream, batters, fatless sponges,
meringues, cheesecakes, mousses, soufflés.
Do not use the whisk for heavy mixtures (e.g.
creaming fat and sugar) - you could damage it.
bn
spiral dough hook
l
For yeast mixtures.
bo
creaming beater (if supplied)
l
The creaming beater is designed for creaming and
mixing soft ingredients. Do not use with heavy
recipes such as dough or hard ingredients, for
example those containing fruit stones, bones or
shells.
Fitting the wiper blade
l
The wiper blade is supplied already fitted and
should always be removed for cleaning
bk
.
1 Carefully fit the flexible wiper blade onto the tool
by locating the base of the wiper blade into the
slot
5
then fit one side into the groove before
gently hooking the end in place
6
. Repeat with
the other side
7
.
Checking the beater height
l
The beater height has been set in the factory and
should not require adjusting. If height adjustment is
required follow the procedure below.
1 With the mixer switched off, insert the creaming
beater and lower the mixer head.
Check the position of the beater in the bowl
8
.
Ideally it should be in contact with the bowl surface
so that it gently wipes the bowl during mixing.
2 If the clearance needs to be adjusted, raise the
mixer head and remove the beater.
3 To loosen and allow adjustment of the shaft
9
,
rotate the nut clockwise using a 15mm spanner
(not supplied in pack).
l
To lower the beater closer to the bottom of the
bowl, turn the beater shaft clockwise.
6
l
The processing of spices is not recommended as they may
damage the plastic parts.
l
The appliance will not work if the compact chopper/grinder is
incorrectly fitted.
l
Use dry ingredients only.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KHH322WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KHH322WH in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info