649663

Kenwood KHG 701 Manual

11
Zoom out
Zoom in
Previous page
1/28
Next page
11
BURNERS AND GRIDS
• These parts can be removed and cleaned with appropriate products.
• Aftercleaning,theburnersandtheiramespreadersmustbewelldriedandcorrectly
replaced.
• Itisveryimportanttocheckthattheburneramespreaderandthecaphavebeen
correctly positioned.
• Failure to do so can cause serious problems.
• Check that the electrode “S” (gs. 3.1 - 3.3)isalways clean to ensuretrouble-free
sparking.
• Check that the probe “T”(gs.3.1-3.3)nexttoeachburnerisalwayscleantoensure
the correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the electric ignition do not use it when the burners are not
in place.
CORRECT REPLACEMENT OF THE AUXILIARY, SEMIRAPID AND RAPID
BURNERS
Itisveryimportanttocheckthattheburneramespreader“F” and the cap “C” have been
correctlypositioned(seegs.3.1and3.2).
Failure to do so can cause serious problems.
CORRECT POSITION OF THE TRIPLE RING BURNER
Thetripleringburnermustbecorrectlypositionedasindicatedbythearrowsing.3.3.
Theburnercorrectlypositionedmustnotrotate(g.3.4).
Then position the cap “A” and the ring “B”(gs.3.4-3.5).
free of any cleaning chemicals to avoid damaging any screen print on the facia.
• Painted surfaces: Clean very carefully with water and neutral soap; the cloth used
must be rinsed well and must be free of any cleaning chemicals.
• Pan stands & burner caps: Clean with a sponge and soapy water or proprietary
cream cleaner. Alway dry throughly. DO NOT PUT IN THE DISHWASHER.
• Burner bodies (aluminium alloy): They should be cleaned with soapy water and a
clean cloth. For stubborn stains a proprietary cream or stainless steel cleaner may
beused;howevertomaintainauniformnishwewouldrecommendthewholearea
is cleaned. NOTE: Please ensure the slots/castlellations are kept free of the any
material/cleaner.
• Gaskets tted below control knobs: Check they are well tted and correctly in
place.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KHG 701 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KHG 701 in the language / languages: English as an attachment in your email.

The manual is 6,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info