Manual Kenwood KHG 602 (page 19 of 28) (English)

649665

Zoom out

Zoom in

1/28

Thetting(g.5.1)ismadeupof:

– 1 nut “A”

– 1elbowtting“C”

– gasket “F”

Connection to the Gas Supply

– Becarefulwhenexiblepipesareused

that they do not come into contact with

moving parts.

– To maintain the thickness of 3 cm, the

hob is tted with a channel to contain

the connection pipe.

– The gas inlet union can be turned in the

directionrequiredaftertheelbowtting

“C” and nut “A”connection (gure 5.1)

hasbeenslackened(g.5.2).

– Never put it in the horizontal or vertical

position.

– Never attempt to turn the elbow “C”

without having rst slackened off the

relative lock nut “A”.

– The gasket “F” (g. 5.1) guarantees

the seal of the gas connection. It is

recommended that it be replaced

whenever it shows even the slightest

deformation or imperfection.

If installation is to be carried out using a

exible connector (to BS669), then the

following points must be adhered to:

Note: Thegasinstallationpipesandthenal

connection to the appliance connecting pipe

shallbeofasufcientsizetomaintaintheheatoutputoftheapplianceasspeciedonthe

rating plate.

1. The appliance exible connector should not be subject to undue forces, either in

normal use whilst being connected or disconnected.

2. The appliance exible connector should not be subject to excessive heat by direct

exposuretoueproductsorbycontactwithhotsurfaces.

3. The socket into which the plug of the appliance exible connector ts should be

permanentlyattachedtoarmlyxedgasinstallationpipeandpositionedsuchthat

thehosehangsfreelydownwardsinanaturalloopanddoesnottouchtheoor.

4. The appliance exible connector should be positioned such that it will not suffer

mechanical damage; eg abrasion from the surrounding kitchen furniture which may

be moved in use, such as a door or drawer, or by being trapped by a stability device.

5. Thebayonetttingshouldbeaccessiblefordisconnectionaftermovingtheappliance.

1/2" BSPT (R) conical/taper

(ISO 7-1) male

1/2" BSPP (G) parallel

(ISO 228-1) male

1/2" BSPP (G) parallel

(ISO 228-1) female

C F A

Fig. 5.1

Fig. 5.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KHG 602 in the language / languages: English as an attachment in your email.

The manual is 6,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood KHG 602 Manual

Product: