649662
27
Zoom out
Zoom in
Previous page
1/32
Next page
27
CONNECTION OF THE POWER SUPPLY CABLE
Important! This cooktop must be connected to the electricity supply only by an
authorised person.
To connect the feeder cable to the hob it is necessary to carry out the following operations:
Unhook the terminal board cover “A” by inserting a screwdriver into the two hooks “B
(g. 5.1). Open completely the terminal block cover “A”.
Unscrew the screw “C”, then unhook the cable clamp “D” by inserting a screwdriver
into the hook “E”. Remove completely the cable clamp “D” (g. 5.1).
Connect the phase, neutral and earth wires to terminal board “F” according to the
diagrams in g. 5.2; the U bolts “G(g. 5.1) shall be used as indicated in the diagrams
in g. 5.2 (they are supplied already tted to the terminals or inside the terminal board,
behind the cover).
Strain the feeder cable and block it with cable clamp “D” (by hooking hook “E” and
screwing screw “C”).
Close the cover “A” of the terminal board “F” (check the two hooks “B” are correctly hooked).
NOTE: The earth conductor must be left about 3 cm longer than the others.
POWER SUPPLY
220-240/380-415 V 3N~ 50/60 Hz
INDUCTION POWER = 7400 W MAX.
FEEDER CABLE SECTION
“Type H05RR-F, H05VV-F or H05V2V2-F”
220-240 V ac 3 x 4 mm
2
(*) (**)
380-415 V 2N ac 4 x 2.5 mm
2
(*) (**)
380-415 V 3N ac 5 x 2.5 mm
2
(*) (**)
(**) Connection via a dedicated circuit.
Diversity factor applied.
A diversity factor may be applied to the total loading of the appliance only by a suitably
qualied person.
If the supply cord (not supplied with the appliance) is damaged, it must be replaced
bythemanufactureroritsserviceagentorasimilarlyqualiedpersoninorderto
avoid a hazard.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KHC 604 IND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KHC 604 IND in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info