649662
16
Zoom out
Zoom in
Previous page
1/32
Next page
16
PROGRAM FOR AUTOMATIC
SWITCHING OFF OF A COOKING
ZONE
This function permits to set a timer from “ 1
to “ 99 ” minutes for automatic turning Off the
cooking zone/s.
With the cooktop switched On:
Select the cooking zone and set the
desired power level.
Within 8 seconds, touch the timer key
CL ” (the led indicating the programmed
zone starts blinking) and set the timer:
The display reads “
0- ”: set the
second digit of the timer by using
the setting selector. If the value shall
be zero touch the display and the
second digit ( 0 ) will start ashing.
Touch the display to conrm o wait
a few seconds till the programmer
automatically turns to the next step.
When the display reads “ -Z ” (where “ Z
” indicates the second digit previously
set): set the rst digit of the timer by
using the setting selector. If the value
shall be zero touch the display and
the rst digit ( 0 ) will start ashing.
Touch the display to conrm o wait
a few seconds till the programmer
automatically turns to the next step.
The program is now processed (led
indicating the programmed zone
steady lit).
The time can be changed at any time
following the same procedure here
above indicated (selecting previously the
cooking zone).
To program another cooking zone,
repeat as described above.
Now the program for automatic switching Off
is complete.
At the end of the countdown the cooking
zone will switch Off automatically, an acoustic
signal (beep) will sound (for 2 minute only),
00 will ash on the timer display and the
led next to the heater display will blink.
Touch one of the keys to stop the beep.
Fig. 2.6
Fig. 2.7
Fig. 2.8
Fig. 2.9
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KHC 604 IND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KHC 604 IND in the language / languages: English as an attachment in your email.

The manual is 6,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info