Carefully lift the main lter out.
(Fig 2)
Carefully lift the ne lter out with
care. (Fig 3)
Rinse all the lters under running
water, then ret all lters in the fol-
lowing order.
Carefully ret the ne lter with
care. (Fig 3)
Carefully ret the main lter. ( Fig
2)
Gently unscrew the course lter
in a clockwise direction. (Fig 1 on
Page 27)
NOTE: Do not over tighten the lters.
Put the lters back in the lter cylinder
in sequence securely. Otherwise the
residue could get into the system and
cause a blockage.
WARNING!
NEVER use the dishwasher without l-
ters in place. Improper replacement of
the lter may reduce the performance
levels of the appliance and damage
dishes and utensils.
•
•
•
•
•
•
2
3
4
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly. (Fig 1)
Use a pointed object, eg. a cocktail
stick, to loosen food particles in
the spray arms’ jets.
•
spray arms
1
Filter cylinder without the lters
NOTE: Do not attempt to remove the spray arms.
