36084
36
Zoom out
Zoom in
Previous page
1/40
Next page
— 36 —
English
What might seem to be a malfunction in your unit may
just be the result of slight misoperation or miswiring.
Before calling service, first check the following table
for possible problems.
? The power does not turn ON.01
The fuse has blown.
After checking for short circuits in the wires, replace the fuse with
one with the same rating.
No ACC position on vehicle ignition.02
Connect the same wire to the ignition as the battery wire.
The remote controller does not work.
See <Connecting Wires to Terminals> (page 30) to connect the
light detector of the remote controller correctly.
? The power cannot be turned off
You select the source mode of this machine, which is connected to a
center unit.
The power cannot be turned off because the center unit is under
operation. If changing a mode other than the source mode of this
machine on the center unit, you can turn off the power.
? The power is automatically turned off.
You switched the source mode while connecting to a center unit.
If selecting the source mode of this machine on the center unit
and then switching to a mode other than this machine, you can
turn off the power.
? No video image appears.
The unit is not connected to the parking brake detection switch.
Make proper connections according to <Connecting Wires to
Terminals>.
The parking brake is not engaged.
For safety reasons no video images are displayed while the
vehicle is moving. Engaging the parking brake will cause images
to be displayed.
The setting of the NTSC/PAL switch is incorrect.
Set the NTSC/PAL switch correctly.
? Nothing happens when the buttons are pressed.04
The " " symbol appears in the screen.
You cannot carry out any operation disabled by disc.
The batteries of the remote controller are weak.
Replace both two batteries of the remote controller with new
ones.
The remote controller does not work.
See <Connecting Wires to Terminals> to connect the light
detector of the remote controller correctly.
A center unit not applicable is connected.
See <IMPORTANT INFORMATION> (page 4).
? The memory is erased when the ignition is turned OFF.10
The battery wire has not been connected to the proper terminal.
Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
The ignition and battery wire are incorrectly connected.11
Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? No sound can be heard, or the volume is low.
The audio setting of audio output is not “ANALOG”.
If connecting through a center unit or RCA cable, select
“ANALOG” for this setting.
The input/output wires or wiring harness are connected incorrectly.22
Reconnect the input/output wires or the wiring harness correctly.
See the section on <Connecting Wires to Terminals>.
? The specified disc does not play, but another one plays instead.52
The specified DVD/CD is quite dirty.
Clean the Disc.
The disc is upside down.
Set the disc with the label face downward.
The disc is severely scratched.55
Try another disc instead.
? The specified track will not play.58-a
Random play has been selected.
Turn off random play.
? Cannot play CD-R or CD-RW.60
Finalization processing is not being conducted for CD-R/CD-RW.
Conduct finalization processing with CD recorder.
? A VCD cannot be played using menus.
The VCD disc being played is not compatible with P.B.C.
Menu playback is available only with VCD discs recorded with
P.B.C.
Troubleshooting Guide
KDV-C810_U.S 02.2.15 10:57 AM Page 36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDV-C810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDV-C810 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info