667460
6
Zoom out
Zoom in
Previous page
1/68
Next page
6
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
General Operation
Audio Control
You can adjust following Audio Control items;
Adjustment Item Display Range
Rear volume* “R-VOLUME” 0 — 35
Subwoofer level “SUB-W L –15 — +15
Bass Boost** “B.BOOST-L “L1”/”L2”/“OFF” (The
indicator turns on according to
the setting.)
System Q “NATURAL”/
“USER”/“ROCK”/
“POPS”/“EASY”/
“TOP40”/“JAZZ”
Natural/User setting/Rock/
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
Bass level “BASS L –8 — +8
Middle level “MID L –8 — +8
Treble level “TRE L –8 — +8
Balance “BALANCE” Left 15 — Right 15
Fader “FADER” Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
*Function of KDC-X492/KDC-MP438U/KDC-MP408U.
**Function of KDC-MP338.
“USER”: The customized Bass, Middle, and Treble levels
are effective. On the KDC-X492/KDC-MP438U/KDC-
MP408U, this item can be selected at any time. On the
KDC-MP338, this item is displayed only when the tone
quality has been adjusted. On the KDC-MP338, this item
disappears when another setting is selected.
You can set Bass, Middle, and Treble for each source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the Control knob.
3 Select the Audio item to adjust
Press the Control knob.
4 Adjust the Audio item
Turn the Control knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the Control knob or 0
button.
Function of KDC-X492/KDC-MP408U
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leval.
Bass level
Adjustment Item Display Range
Bass Center Frequency “BASS F” 40/50/60/70/80/100/
120/150 Hz
Bass Q Factor “BASS Q” 1.00/1.25/1.50/2.00
Bass Extend “BASS EXT” OFF/ON
Middle level
Adjustment Item Display Range
Middle Center Frequency “MID F” 0.5/1.0/1.5/2.0 kHz
Middle Q Factor “MID Q” 1.0/2.0
Treble level
Adjustment Item Display Range
Treble Center Frequency “TRE F” 10.0/12.5/15.0/17.5 kHz
1 Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 6).
2 Enter Detail adjustment mode of Audio
Control
Press the Control knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the Control knob.
4 Adjust the Detail Audio item
Turn the Control knob.
5 Exit the Detail Audio Control mode
Press the Control knob for at least 1 second.
When you set the Bass Extend to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime by
pressing any button except for Control knob or 0
button.
B64-3955-00_English_K_r1.indd 6B64-3955-00_English_K_r1.indd 6 07.11.12 5:19:56 PM07.11.12 5:19:56 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-X492 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-X492 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info