163719
15
Zoom out
Zoom in
Previous page
1/60
Next page
English
|
15
Equalizer Control
1
Select the source to adjust
Press the [SRC] button.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "EQ" is
displayed above the [3] button.
Refer to <Notes on Multi-function Key System>
(page 9).
3 Enter Equalizer Control mode
Press the [3] ("EQ") button.
When "2 ZONE" of <Audio Setup> (page 12) is ON,
you cannot select "EQ".
4 Select the Equalizer Control item to adjust
Press a [1] — [3]/[5] button.
Multi-function key operation Equalizer Control Item
[1] "SYS.Q" System Q Setting
[2] "F" Equalizer Front Setting
[3] "R" Equalizer Rear Setting
[5] "Preset" [1] "RCL"
[2] "MEM"
Recall mode
Memory mode
"Preset": You can store an adjusted equalizer control
value by selecting "MEM". Refer to <Memory
mode> (page 17). Also, you can recall it by
selecting "RCL". Refer to <Memory Recall
mode> (page 17).
5 Adjust the Equalizer control item
System Q Setting (Sound Type)
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Sound setting Display
User memory "USER"
Natural "NATURAL"
Rock "ROCK"
Pops "POPS"
Easy "EASY"
Top 40 "TOP 40"
Jazz "JAZZ"
• User memory:
The values set on the <Audio Control> (page 11).
Change each setting value with the <Sound
Management system> (page 14).
First, select the speaker type with the Speaker setting.
Equalizer Front Setting/
Equalizer Rear Setting
1 Select a frequency band you wish to adjust.
Press the [2] ("F") or [3] ("R") button.
Each time you press the button, the band
alternates between "Band 1" and "Band 4".
2 Select the items to adjust for Equalizer.
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the item to be
adjusted alternates between the items shown
in the table below.
3 Adjust the Equalizer.
Push the Control knob towards [4] or
[¢].
Each time you push the knob, the setting
alternates between the settings shown in the
table below.
Equarizer adjustment item Range
Equalizer Front Frequency/
Equalizer Rear Frequency
Refer to the followings.
Equalizer Front Level/
Equalizer Rear Level
–9 — +9
Equalizer Front Quality/
Equalizer Rear Quality
0.25/ 0.50/ 1.00/ 2.00
The frequency which can be selected by each
Frequency band is shown below.
Band Frequency
Band1 60/ 80/ 100/ 120/ 160/ 200 Hz
Band2 250/ 315/ 400/ 500/ 630/ 800/ 1k Hz
Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 kHz
Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 kHz
To get the best sound, first set the Cabin Setting
and Speaker Select Front/Rear parameters using the
<Sound Management system> (page 14).
6 Exit Equalizer Control mode
Press the [6] ("RTN") button.
B64-3304-00_01_E_English.indd 15B64-3304-00_01_E_English.indd 15 05.11.15 2:35:43 PM05.11.15 2:35:43 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kdc-w8534 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kdc-w8534 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood kdc-w8534

Kenwood kdc-w8534 User Manual - German - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info