41273
24
Zoom out
Zoom in
Previous page
1/67
Next page
24
|
English
General features
Function of the KDC-W8027
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the [Q] button.
"SP SELECT" is displayed.
3 Select the Speaker type
Press the [2] — [5] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type Button Display
OFF [2] "OFF"
For 5 & 4 in. speaker [3] "5/4"
For 6x9 & 6 in. speaker [4] "6*9/6"
For the OEM speaker [5] "OEM"
4 Exit Speaker Setting mode
Press the [Q] button.
In External disc, or Auxiliary input source
Dual Zone System
Makes the sound different for the front channel
and rear channel.
Output the Internal source sound from either one
of the front or rear channels, and the sound of
other source from the Dual zone channel.
1 Select the source
Press the [SRC] button.
Select the source sound to be output from the
Dual zone channel.
2 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "2-ZN" is
displayed above the [5] /[2] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
3 Enter the Dual Zone System Control mode
Press the [5] ("2-ZN")(KDC-W8027)/ [2] ("2-
ZN")(KDC-PSW9527/W9027) button.
4 Select the item for adjustment
Press the desired [2] — [3] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
Adjustment Item Button Display Range
Dual Zone System [2] "ON/OFF" ON/OFF
Dual Zone System
Front & Rear
[3] "F j R" Front/Rear
Dual Zone System Rear:
The front is this unit’s internal source, and the rear is
selected source sound.
Dual Zone System Front:
The rear is this unit’s internal source, and the front is
selected source sound.
5 Exit the Dual Zone System Control mode
Press the [6] ("RTN") button.
6 Select the source
Press the [SRC] button.
Select the source sound to be output from the
internal source channel.
The Dual Zone System can be used with the sources
shown below.
- Internal auxiliary input
- KCA-S210A
- CA-C1AX
- External disc changer/ player
While Dual Zone System is ON, the setting of Dual
Zone System Front or Rear is disabled.
Set Dual Zone System Front or Rear first, and then set
the Dual Zone System to ON.
When the Dual Zone System is ON, there is no Dual
zone channel audio control or other effect.
When you use the Dual Zone System by selecting the
optional accessory source for the output of the Dual
zone channel, you cannot select another optional
accessory source as the source for the Internal source
channel.
When "SRS WOW" is selected at 'System Q' (KDC-
W8027) (page 20) the Dual Zone System cannot be
turned on and off.
Also set all the 'Audio Control' (KDC-W8027) (page 22)
WOW items to OFF.
The Dual Zone System cannot be turned on and off if
even one of the items is set to ON.
The Dual Zone System cannot be used if a GSM hands
free unit or a DAB control unit is connected.
KDC-PSW9527(E)_U.S _r5 24 03.11.28, 10:59:09 PM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W8027 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W8027 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W8027

Kenwood KDC-W8027 User Manual - German - 66 pages

Kenwood KDC-W8027 User Manual - Dutch - 66 pages

Kenwood KDC-W8027 User Manual - French - 66 pages

Kenwood KDC-W8027 User Manual - Italian - 66 pages

Kenwood KDC-W8027 User Manual - Portuguese - 66 pages

Kenwood KDC-W8027 User Manual - Spanish - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info