465205
29
Zoom out
Zoom in
Previous page
1/56
Next page
English
|
29
DTA (Digital Time Alignment) setting
Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 28).
1 Enter DTA setting mode
Select “SOUND” > “Setup > “DTA.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker Display
Front speaker “Front”
Rear speaker “Rear"
Subwoofer “SW"
Turn the Control knob.
3 Set the compensation value of the speaker
position
Turn the Control knob and push the center
when the desired value is displayed.
Adjust between 0 and 440 cm.
Refer to “DTA of <Menu Glossary> (page 44) on
how to set the compensation value.
Exit DTA setting mode.
X’Over setting
Fine adjusting the following setting values
corresponding to the X’Over values set in the
section <Speaker Setting> (page 28);
Adjustment Item Display Range
Front High Pass Filter,
Rear High Pass Filter
“FC” Through, 30, 40, 50, 60, 70,
80, 90, 100, 120, 150, 180,
220, 250 (Hz)
Front High Pass Slope,
Rear High Pass Slope,
Subwoofer Slope
“SLOPE” -6, -12, -18, -24 dB/Oct
Subwoofer Low Pass
Filter
“FC” 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250,
Through (Hz)
Subwoofer Phase “PHASE” Reverse (180°)/ Normal (0°)
1 Enter X’Over setting mode
Select “SOUND” > “Setup > “X’Over”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the speaker you want to set
Setting speaker Display
Front speaker “Front”
Rear speaker “Rear"
Subwoofer “Subwoofer"
Turn the Control knob and push the center
when the desired item is displayed.
3 Select the item you want to set
Item Setting overview
“Front” >“FC”
>“SLOPE”
Front High Pass Filter
Front High Pass Slope
“Rear" >“FC”
>“SLOPE”
Rear High Pass Filter
Rear High Pass Slope
“Subwoofer" >“FC”
>“SLOPE”
>“PHASE”
Subwoofer Low Pass Filter
Subwoofer Slope
Subwoofer Phase
Push the Control knob towards up or down.
4 Set the X’Over value
Turn the Control knob.
5 Repeat steps 2 to 4 to complete the X’Over
setting.
6 Exit X’Over setting mode
Press the [FNC] button.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W7644 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W7644 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W7644

Kenwood KDC-W7644 User Manual - German - 56 pages

Kenwood KDC-W7644 User Manual - Dutch - 56 pages

Kenwood KDC-W7644 User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info