66455
54
Zoom out
Zoom in
Previous page
1/56
Next page
54
|
English
Hold Error: The protective circuit in the unit activates
when the temperature inside the
automatic disc changer exceeds 60°C
(140°F), stopping all operation.
Cool down the unit by opening
the windows or turning on the air
conditioner. As the temperature falls
below 60°C (140°F), the disc will start
playing again.
No Name: Attempted to display DNPS during the CD
play having no disc names preset.
Waiting: Radio text data is being received.
Load: Discs are being exchanged in the Disc
changer.
Reading: The unit is reading the data on the disc.
IN (Blink): The CD player section is not operating
properly.
Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
Protect (Blink): The speaker wire has a short-circuit or
touches the chassis of the vehicle, and
then the protection function is activated.
Wire or insulate the speaker cable
properly and press the reset button.
Unsupported File:
An Audio file is played with a format that
this unit can’t support.
----
Copy Protection:
A copy-protected file is played.
----
DEMO MODE (Blink):
The Demonstration mode has been
selected.
The <Demonstration mode Setting>
(page 44) is ON. Turn it OFF.
No Device: The USB device is selected as a source
although no USB device is connected.
Change the source to any source other
than USB. Connect an USB device, and
change the source to USB again.
N/A Device: An unsupported USB device is connected.
For the supported USB devices, refer to
<About USB device> (page 10).
Error 15:
No Music Data: • The connected USB device contains no
playable audio file.
Media was played that doesn’t have data
recorded that the unit can play.
Use media that has data recorded that
the unit can play.
USB Error: The connected USB device is rated a
current capacity higher than the allowable
limit.
Check the USB device with reference to
<About USB device> (page 10).
Some trouble may have occurred to the
connected USB device.
Remove the USB device and then
reconnect it. When the same message
displays again, use another USB device.
Troubleshooting Guide
B64-3385-00_00_E_English.Indd 54B64-3385-00_00_E_English.Indd 54 06.1.27 3:32:25 PM06.1.27 3:32:25 PM
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W7534U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W7534U in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W7534U

Kenwood KDC-W7534U User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info