163473
38
Zoom out
Zoom in
Previous page
1/56
Next page
38
|
Nederlands
Ander model dan stand-bymodel / Wanneer het
dubbelezonesysteem is ingeschakeld
Instellen van dubbelezonesysteem
Instellen van het geluid van het voorste en
het achterste kanaal wanneer het dubbele
zonesysteem is ingeschakeld.
Display Instelling
"Zone 2 : Rear" De subbron (hulpingangsbron) moet het
achterkanaal zijn.
"Zone 2 : Front" De subbron (hulpingangsbron) moet het
voorkanaal zijn.
Wanneer "Running"" wordt getoond (geteld), loopt
de teller verder, ook al is de G-stopwatchfunctie
stopgezet. Als u de teller wilt stoppen, gaat u naar de
menumodus en drukt u vervolgens op de regelknop.
Bij het uitschakelen van de spanning (bv. ACC OFF)
wordt tijdens het tellen de waarde 1 seconde of
minder weergegeven als "00".
Functies van de KDC-W7031
G-Analyzer-stopwatch
De stopwatchbediening kan worden gestart met
de Ganalyzer-functie.
Gebruik de chronometer van de G-analyzer niet op
openbare wegen.
1 Selecteer de G-Analyzer-stopwatchfunctie
Druk de regelknop naar [FM] of [AM].
Kies de "Stop Watch" display.
2 Schakel de G-Analyzer-stopwatchfunctie in
Houd de regelknop ten minste 1 seconde
ingedrukt.
"Stop" wordt getoond.
3 Schakel de Teller-gereedfunctie in
Druk de regelknop in.
"Ready" wordt getoond.
4 Start de teller
Wanneer G in de verticale richting wordt
gedetecteerd tijdens het rijden, wordt de teller
automatisch gestart.
"Running" wordt getoond.
U kunt de teller ook starten door op de regelknop te
drukken.
5 Stop de teller
Druk de regelknop in.
"Stop" wordt getoond.
De regeling begint opnieuw wanneer u versnelt of op
de regelknop drukt.
Volg de bediening na stap 3.
Wanneer u de teller reset
(Terwijl "Stop" wordt weergegeven)
Houd de regelknop ten minste 2 seconden
ingedrukt.
De teller kan worden teruggesteld wanneer hij is
gestopt.
6 Sluit de G-stopwatchfunctie af
Druk op de [MENU] toets.
Ander model dan stand-bymodel
Bass Management System (B.M.S.)
Stel het versterkingsniveau van de lage tonen
van de externe versterker in met behulp van de
basiseenheid.
Display Instelling
"AMP Bass : Flat" Het versterkingsniveau van de lage tonen
is vlak.
"AMP Bass : +6" Het versterkingsniveau van de lage tonen is
laag (+6dB).
"AMP Bass : +12" Het versterkingsniveau van de lage tonen is
matig (+12dB).
"AMP Bass : +18" Het versterkingsniveau van de lage tonen is
hoog (+18dB).
Raadpleeg de catalogus of de gebruiksaanwijzing voor
vermogensversterkers die via deze eenheid bediend
kunnen worden.
Er zijn versterkermodellen die instelbaar zijn van vlak
tot +18 dB, en er zijn versterkermodellen die instelbaar
zijn van vlak tot +12 dB.
Wanneer een versterker is aangesloten die alleen
instelbaar is tot +12, is instelling op een hogere
waarde zlefs niet mogelijk wanneer "AMP Bass : +18"
wordt gekozen.
Menusysteem
B64-2989-00_Dutch_r4.Indd 38B64-2989-00_Dutch_r4.Indd 38 04. 11 .1 6 9 :17: 29 AM04. 11 .16 9 :17: 29 AM
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kdc-w7531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kdc-w7531 in the language / languages: Dutch as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood kdc-w7531

Kenwood kdc-w7531 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info