62437
43
Zoom out
Zoom in
Previous page
1/48
Next page
Some functions of this unit may be disabled by
some settings made on this unit.
! Cannot switch to Aux source.
AUX is not turned on. <Built-in Auxiliary input
Setting> (page 34)
AUX cannot be used when the KCA-iP200 is
connected.
! Cannot set up the subwoofer.
Cannot set up subwoofer phase.
No output from the subwoofer.
Cannot set up the low pass filter.
<Subwoofer Output> (page 9) is not set to On.
The Dual zone function is enabled. <Audio
Setup> (page 8)
! Cannot set up the high pass filter.
Cannot set up the Fader.
The Dual zone function is enabled. <Audio
Setup> (page 8)
! Cannot set up the subwoofer phase.
Low pass filter is set to Through. <Audio Setup>
(page 8)
! Cannot select the output destination of the
subsource in the Dual zone.
Cannot adjust the volume of the rear speakers.
The Dual zone function is disabled. <Audio
Setup> (page 8)
! No Audio control effect on AUX.
The Dual zone function is enabled. <Audio
Setup> (page 8)
! Cannot register a security code.
Cannot set up Display Illumination Control.
<Demonstration mode Setting> (page 35) is not
turned off.
! Cannot set up the Power-off timer.
<Security Code> (page 27) is not set.
! Cannot play audio files.
<CD Read Setting> (page 34) is set to "2".
! Cannot File select.
Cannot direct music serch.
The Random play function is enabled.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
General
? The Touch Sensor Tone doesn’t sound.
The preout jack is being used.
The Touch Sensor Tone can’t be output from the
preout jack.
Tuner source
? Radio reception is poor.
The car antenna is not extended.
Pull the antenna out all the way.
The antenna control wire is not connected.
Connect the wire correctly, referring to the
section on <Connecting Wires to Terminals>
(page 39).
Disc source
? The specified disc does not play, but another one
plays instead.
The specified CD is quite dirty.
Clean the CD.
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the number
for the specified disc.
The disc is severely scratched.
Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
The media is scratched or dirty.
Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 6).
The audio file is broken or not supported.
Damaged and unsupported files are skipped.
The recording condition is bad.
Record the media again or use another media.
USB device source
? The USB device is not detected.
The USB connector is disconnected.
Connect the connector of the USB device
properly.
? The USB device does not play its audio files.
The USB connector is disconnected.
Connect the connector of the USB device
properly.
Troubleshooting Guide
English
|
43
B64-3629-00_00.Indd 43B64-3629-00_00.Indd 43 07.1.6 6:25:33 PM07.1.6 6:25:33 PM
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W7037 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W7037 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W7037

Kenwood KDC-W7037 User Manual - German - 46 pages

Kenwood KDC-W7037 User Manual - Dutch - 46 pages

Kenwood KDC-W7037 User Manual - French - 46 pages

Kenwood KDC-W7037 User Manual - Italian - 46 pages

Kenwood KDC-W7037 User Manual - Polish - 48 pages

Kenwood KDC-W7037 User Manual - Portuguese - 46 pages

Kenwood KDC-W7037 User Manual - Swedish - 48 pages

Kenwood KDC-W7037 User Manual - Spanish - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info