121774
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
|
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
Bluetooth Setup
Function of KDC-BT6544U/BT6544UY/BT6044/BT6144U
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to five Bluetooth devices to this unit.
When registering from Bluetooth devices
1 Turn on the control unit.
2 Start registering a unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KENWOOD BT
CD/R-3P2” from the list of connected units.
3 Enter a PIN code
Input the PIN code registered as mentioned in
<Registering PIN Code> (page 28).
Check that registration is complete on the
Bluetooth device.
4 By operating the Bluetooth device, start hands-
free connection.
When registering from this unit
1 Enter Bluetooth device registration mode
Select “MENU” > “DVC REGIST.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
Search for the Bluetooth device.
When search is completed, “FINISHED” is displayed.
2 Select the Bluetooth device
Turn the [AUD] knob or push it towards up or
down to select the Bluetooth device.
Press the [AUD] knob to determine the
selection.
3 Input the PIN code
Operation type Operation
Select the numbers. Turn the [AUD] knob or push it towards
up or down.
Move to the next digit. Push the [AUD] knob towards right.
Delete the last digit. Push the [AUD] knob towards left.
4 Transmit the PIN code
Press the [AUD] knob for at least 1 second.
If “PAIRING OK is displayed, registration is
completed.
5 Return to the device list
Press the [AUD] knob.
6 Exit Bluetooth device registration
Press the [SEARCH] button.
This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth device>
(page 28).
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
1 Enter special device registration mode
Select “MENU” > “S-DVC SELECT.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A list is displayed.
2 Select a device name
Turn the [AUD] knob or push it towards up or
down to select a device name.
Press the [AUD] knob to determine the
selection.
If “COMPLETE” is displayed, registration is
completed.
3 Go through the procedure of <Registering
Bluetooth device> (page 28) and complete the
registration (pairing).
Cancelling special device registration mode
Press the [SEARCH] button.
If the device name is not in the list, select “OTHER
PHONE”.
Registering PIN Code
By operating the Bluetooth device, specify the PIN
code necessary for registering this unit.
1 Enter PIN code edit mode
Select “MENU” > “PIN EDIT.
Press the [AUD] knob for at least 1 second.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W5644U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W5644U in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W5644U

Kenwood KDC-W5644U User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info