68541
13
Zoom out
Zoom in
Previous page
1/20
Next page
English
|
3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Before using this unit for the first time
This unit is initially set on the Demonstration mode.
When using this unit for the first time, cancel the
<Demonstration mode Setting> (page 12).
How to reset your unit
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when the
Reset button is pressed.
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
¤
Applying spray cleaner directly to the unit may affect its
mechanical parts. Wiping the faceplate with a hard cloth or
using a volatile liquid such as thinner or alcohol may scratch
the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe
them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather,
dew or condensation may form on the lens in the
CD player of the unit. Called lens fogging, this
condensation on the lens may not allow CDs to play.
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they work
with your model and in your area.
• The characters which can be displayed by this unit
are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } |
~ .
• The RDS feature won’t work where the service is not
supported by any broadcasting station.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Handling CDs
• Do not touch the recording surface of the CD.
• Do not stick tape etc. on the CD, or use a CD with
tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing CDs from this unit, pull them out
horizontally.
• If the CD center hole or outside rim has burrs,
use the CD only after removing the burrs with a
ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
• CDs with coloring on the recording surface or CDs
that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do not
have the mark.
• You cannot play a CD-R or CD-RW that has not been
finalized. (For the finalization process refer to your
CD-R/CD-RW writing software, and your CD-R/CD-
RW recorder instruction manual.)
B64-4214-00_00_En.indd 3B64-4214-00_00_En.indd 3 08.7.25 10:26:19 AM08.7.25 10:26:19 AM
English
|
5
Tuner functions
FM Band : [FM+]
Switches between FM1, FM2, and FM3 each time the
[FM+] button is pressed.
AM Band : [AM–]
Switches to AM.
Tuni ng : [ 4]/[¢]
Changes the frequency.
During reception of stereo stations the “ST” indicator is ON.
Tra c information : [FM+]
Turns ON or OFF the Tra c Information function when
pressing for at least 2 seconds. When the function is
turned ON, “TI” indicator is ON.
If tra c bulletin starts when the function is ON,
TRAFFIC” is displayed and tra c information is
received.
If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
Preset memory : [1] - [6]
Memorize the station selected when pressing for at
least 2 seconds.
Preset tuning : [1] - [6]
Recalls the memorized station.
Disc play functions
Disc play : Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “IN” indicator is ON.
3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Refer to <About Audio file> (page 13) for the Audio file by
models you can play.
Pause and play : [6]
Switches between pause and play each time this
button is pressed.
Disc ejection : [0]
You can eject the disc for 10 minutes after switching off the
engine.
Music search : [4]/[¢]
Changes the music when this button is pressed.
Fast reverses or forwards the music while pressing.
Folder/Disc search : [FM+]/[AM–]
Switches the folder containing the audio  le or the
disc in the disc changer.
Track/ File/ Disc/ Folder repeat play : [4]
Switches between Track Repeat (“TRAC REP), Disc
Repeat (“DISC REP”) (In Disc Changer), and OFF (“REP
OFF”) when pressed while playing a CD.
Switches between File Repeat (“FILE REP”), Folder
Repeat (“FOLD REP”), and OFF (“REP OFF”) when
pressed while playing an audio  le.
Scan play : [2]
Successively plays the intro of the music in the disc or
folder.
TRAC SCN”/ “FILE SCN” is displayed during Scan Play.
Random play : [3]
Randomly plays the music in the disc or folder.
“DISC RDM”/ “FOLD RDM” is displayed during Random
Play.
Magazine random play (KDC-W3544W) : [5]
Randomly plays the music in the disc changer.
“MGZN RDM” is displayed during Magazine Random
Play.
Text/Title scroll : [DISP]
Scrolls the tuner, CD and audio  le text display when
pressed for at least 1 second.
B64-4214-00_00_En.indd 5B64-4214-00_00_En.indd 5 08.7.25 10:26:21 AM08.7.25 10:26:21 AM
English
|
7
In Audio file source
Information Display
Music title & Artist name “TITLE”
Album name & Artist name ALBUM”
Folder name “FOLDER”
File name “FILE”
Play time & Music number “P-TIME”
Clock “CLOCK”
In Standby/ Auxiliary input source
Information Display
Source name “SRC NAME”
Clock “CLOCK”
When you select the clock display, the display setting of
each source will be changed to the clock display.
Album name cannot be displayed in WMA file.
If the selected display item does not have any
information, alternative information is displayed.
Manual Clock Adjustment
1 Select the Clock display
Press the [DISP] button.
2 Enter Clock Adjust mode
Press the [DISP] button for at least 1 second.
The clock display blinks.
3 Adjust the hours
Press the [FM+] or [AM–] button.
Adjust the minutes
Press the [4] or [¢] button.
4 Exit Clock adjustment mode
Press the [DISP] button.
You can do this adjustment when the “SYNC” of the
<Menu System> (page 10) is set as “OFF”.
B64-4214-00_00_En.indd 7B64-4214-00_00_En.indd 7 08.7.25 10:26:22 AM08.7.25 10:26:22 AM
8
|
KDC-W3544W/KDC-W3044/KDC-W313
Tuner Operation
PTY (Program Type)
Selecting the Program Type and searching for a
station.
1 Enter PTY mode
Press the Search button.
During PTY mode the “PTY indicator is ON.
This function cannot be used during a traffic bulletin or
AM reception.
2 Select the Program Type
Press the [FM+] or [AM–] button.
No. Program Type Display
1 Speech “SPEECH”
2. Music “MUSIC”
3. News “NEWS”
4. Current Affairs AFFAIRS
5. Information “INFO”
6. Sport “SPORT”
7. Education “EDUCATE”
8. Drama “DRAMA
9. Culture “CULTURE”
10. Science “SCIENCE”
11. Varied “VARIED”
12. Pop Music “POP M”
13. Rock Music “ROCK M”
14. Easy Listening Music “EASY M”
15. Light Classical “LIGHT M”
16. Serious Classical “CLASSICS”
17. Other Music OTHER M”
18. Weather “WEATHER”
19. Finance “FINANCE”
20. Childrens programs “CHILDREN”
21. Social Affairs “SOCIAL
22. Religion “RELIGION”
23. Phone In “PHONE IN”
24. Travel “TRAVEL
25. Leisure “LEISURE”
26. Jazz Music JAZZ”
27. Country Music COUNTRY”
28. National Music “NATION M”
29. Oldies Music “OLDIES”
30. Folk Music “FOLK M”
31. Documentary “DOCUMENT”
Speech and Music include the Program type shown
below.
Music: No.12 — 17, 26 — 30
Speech: No.3 — 11, 18 — 25, 31
3 Search for the selected Program Type station
Press the [4] or [¢] button.
When the selected Program Type is not found, “NO PTY
is displayed. Select another Program Type.
4 Exit PTY mode
Press the Search button.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)>.
2 Preset the Program Type
Press the desired [1] — [6] button for at least 2
seconds.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)>.
2 Recall the Program Type
Press the desired [1] — [6] button.
Changing Language for PTY Function
Selecting the Program Type display language.
1 Enter PTY mode
Refer to <PTY (Program Type)>.
2 Enter Changing Language mode
Press the [DISP] button.
3 Select the language
Press the [FM+] or [AM–] button.
Language Display
English “ENGLISH”
French “FRENCH”
German “GERMAN”
4 Exit Changing Language mode
Press the [DISP] button.
B64-4214-00_00_En.indd 8B64-4214-00_00_En.indd 8 08.7.25 10:26:22 AM08.7.25 10:26:22 AM
12
|
KDC-W3544W/KDC-W3044/KDC-W313
Menu Operation
Auxiliary Input Display Setting
Selecting the display when changing to Auxiliary
input source.
1 Select Auxiliary input source
Press the [SRC] button.
Select the AUX” display.
2 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
3 Select Auxiliary input display setting mode
Press the [FM+] or [AM–] button.
Select the “NAME SET display.
4 Enter Auxiliary input display setting mode
Press the [AUD] knob for at least 1 second.
The presently selected Auxiliary input display is
displayed.
5 Select the Auxiliary input display
Press the [4] or [¢] button.
Each time you push the knob, the display alternates
as listed below.
AUX”
“DVD”
“PORTABLE”
“GAME”
“VIDEO”
“TV
6 Exit Auxiliary input display setting mode
Press the Search button.
When operation stops for 10 seconds, the name at that
time is registered, and the Auxiliary input display setting
mode closes.
Demonstration mode Setting
Sets the demonstration mode.
1 Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
2 Select the Demonstration mode
Press the [FM+] or [AM–] button.
Select the “DEMO” display.
3 Set the Demonstration mode
Press the [AUD] knob for at least 2 seconds.
Each time you press the knob at least 2 seconds,
the Demonstration mode alternates between the
settings shown in the table below.
Display Setting
“DEMO ON” The Demonstration mode function is ON.
“DEMO OFF” Exit Demonstration mode (Normal mode).
Auto memory entry
1
Enter Menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
2 Select the Auto memory mode
Press the [FM+] or [AM–] button.
Select the A-MEMORY display.
3 Enter the Auto memory mode
Press the [AUD] knob for at least 2 seconds.
The Auxiliary input display can be set only when the
built-in auxiliary input or the auxiliary input of optional
KCA-S220A is used. On the KCA-S220A, “AUX EXT is
displayed by default.
B64-4214-00_00_En.indd 12B64-4214-00_00_En.indd 12 08.7.25 10:26:25 AM08.7.25 10:26:25 AM
English
|
13
Appendix
About Audio file
Playable Audio file
MP3 (.mp3), WMA (.wma)
Playable disc media
CD-R/RW/ROM
Playable disc file format
ISO 9660 Level 1/2, Joliet, Romeo, Long file name.
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
Playing order of the Audio file
In the example of folder/file tree shown below, the
files are played in the order from to .
CD
v

()
<
: Folder
v
: Audio 

v

v
v
v.

v
Folder
Audio file
An online manual about audio files is put on the
site, www.kenwood.com/audiofile/. On this online
manual, detailed information and notes which are not
written in this manual are provided. Make sure to read
through the online manual as well.
Menu Glossary
SWPRE (Switching Preout)
Switches the preout between rear output (“R”) and
subwoofer output (“SW”).
• SPRM (Supreme)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding at low bit rate.
Supplementing is optimized by compression
format (MP3 or WMA) and processed according to
bit rate.
The effect is negligible with music that is encoded
at high bit rate, variable bit rate or has minimal high
frequency range.
• CD READ
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CD may be unplayable even when set to “2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
• AUX
When this is set to ON, AUX source can be selected.
ON1: Outputs the sound of external unit connected
to the AUX terminal when switched to AUX
source.
ON2: Activates the attenuator function when
switched to AUX source.
Turn off the attenuator function when
listening to output from external unit. This
prevents the noise when no external unit is
connected to AUX terminal.
OFF: Disables the selection of AUX source.
Set to OFF when not using the AUX terminal.
NEWS (News Bulletin with Timeout Setting)
Automatically receives news bulletin when it
starts. Set the time during which interrupt is to be
disabled after start of another news bulletin.
Changing ”NEWS 00M” to ”NEWS 90M” turns this
function ON.
If news bulletin starts when this function is ON,
TRAFFIC is displayed and news is received. If ”20M”
is has been set, reception of another news bulletin
will not start for 20 minutes.
AUTO1, AUTO2, MANUAL (Tuning mode select)
Select a tuning mode of the radio.
Tuning mode Display Operation
Auto seek AUTO1” Automatic search for a station.
Preset station seek AUTO2” Search in order of the stations in the
Preset memory.
Manual “MANUAL Normal manual tuning control.
AF (Alternative Frequency)
When the reception is poor, automatically alternate
to another frequency broadcasting the same
program in the same RDS network with better
reception.
RUS (Russian language setting)
When this is set to ON, the following character
strings are displayed in Russian:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200/BT100 (optional
accessory)
B64-4214-00_00_En.indd 13B64-4214-00_00_En.indd 13 08.7.25 10:26:25 AM08.7.25 10:26:25 AM
English
|
19
Troubleshooting Guide
Some functions of this unit may be disabled by
some settings made on this unit.
! Cannot display the user of System Q.
<Audio Control> (page 6) is not set.
! Cannot set up the subwoofer.
No output from the subwoofer.
Cannot set up the low pass filter.
Preout is not set to subwoofer. “SWPRE” of
<Menu System> (page 10)
<Subwoofer output> (page 4) is not set to On.
! Cannot register a security code.
Cannot set up Display.
Power OFF Timer does not function.
<Demonstration mode Setting> (page 12) is not
turned off.
What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.
Tuner source
? Radio reception is poor.
The car antenna is not extended.
Pull the antenna out all the way.
Disc source
? The specified disc does not play, but another one
plays instead.
The specified CD is quite dirty.
Clean the CD referring to the CD cleaning of the
section on <Handling CDs> (page 3).
The disc is loaded in a different slot from that
specified.
Eject the disc magazine and check the number
for the specified disc.
The disc is severely scratched.
Try another disc instead.
Audio file source
? The sound skips when an Audio file is being
played.
The media is scratched or dirty.
Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).
The recording condition is bad.
Record the media again or use another media.
The messages shown below display your
systems condition.
TOC ERR: No disc has been loaded in the disc
magazine.
The CD is quite dirty. The CD is upside-
down. The CD is scratched a lot.
E-05: The disc is unreadable.
E-15: Media was played that doesn’t have data
recorded that the unit can play.
E-77: The unit is malfunctioning for some reason.
Press the reset button on the unit. If the “E-
77” code does not disappear, consult your
nearest service center.
E-99: Something is wrong with the disc magazine.
Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press
the reset button on the unit. If the “E-99”
code does not disappear, consult your
nearest service center.
IN (Blink): The CD player section is not operating
properly.
Reinsert the CD. If the CD cannot be
ejected or the display continues to flash
even when the CD has been properly
reinserted, please switch off the power
and consult your nearest service center.
PROTECT: The speaker wire has a short-circuit or
touches the chassis of the vehicle, and then
the protection function is activated.
Wire or insulate the speaker cable
properly and press the reset button. If
the “PROTECT code does not disappear,
consult your nearest service center.
NA FILE: An Audio file is played with a format that this
unit can’t support.
----
COPY PRO: A copy-protected file is played.
----
B64-4214-00_00_En.indd 19B64-4214-00_00_En.indd 19 08.7.25 10:26:31 AM08.7.25 10:26:31 AM
20
|
KDC-W3544W/KDC-W3044/KDC-W313
Specifi cations
FM tuner section
Frequency range (50 kHz space)
: 87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB)
: 0.7 V/75 Ω
Quieting Sensitivity (S/N = 46dB)
: 1.6 V/75 Ω
Frequency response (±3.0 dB)
: 30 Hz – 15 kHz
Signal to Noise ratio (MONO)
: 65 dB
Selectivity (DIN) (±400 kHz)
: ≥ 80 dB
Stereo separation (1 kHz)
: 35 dB
MW tuner section
Frequency range (9 kHz space)
: 531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB)
: 25 µV
LW tuner section
Frequency range
: 153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB)
: 45 µV
CD player section
Laser diode
: GaAlAs
Digital filter (D/A)
: 8 Times Over Sampling
D/A Converter
: 24 Bit
Spindle speed
: 500 – 200 rpm (CLV)
Wow & Flutter
: Below Measurable Limit
Frequency response (±1 dB)
: 20 Hz – 20 kHz
Total harmonic distortion (1 kHz)
: 0.01 %
Signal to Noise ratio (1 kHz)
: 105 dB
Dynamic range
: 93 dB
MP3 decode
: Compliant with MPEG-1/2 Audio Layer-3
WMA decode
: Compliant with Windows Media Audio
Audio section
Maximum output power
: 50 W x 4
Output power (DIN 45324, +B=14.4V)
: 30 W x 4
Speaker Impedance
: 4 – 8 Ω
Tone action
Bass : 100 Hz ±8 dB
Middle : 1 kHz ±8 dB
Treble : 10 kHz ±8 dB
Preout level / Load (CD)
: 2000 mV/10 kΩ
Preout impedance
: ≤ 600 Ω
Auxiliary input
Frequency response (±3 dB)
: 20 Hz – 20 kHz
Input Maximum Voltage
: 1200 mV
Input Impedance
: 10 kΩ
General
Operating voltage (11 – 16V allowable)
: 14.4 V
Current consumption
: 10 A
Installation Size (W x H x D)
: 182 x 53 x 155 mm
Weight
: 1.30 kg
Specifications subject to change without notice.
B64-4214-00_00_En.indd 20B64-4214-00_00_En.indd 20 08.7.25 10:26:31 AM08.7.25 10:26:31 AM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-W313A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-W313A in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-W313A

Kenwood KDC-W313A User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info