41269
31
Zoom out
Zoom in
Previous page
1/67
Next page
English
|
31
2nd section
Multi-function key operation
Audio setup item
[2]
"MEMORY"
[2] "USER"
[3] "INST"
User Memory
User Insttaller
[3]
"CALL"
[2] "USER"
[3] "INST"
Call User
Call Insttaller
You can store an adjusted audio setup value by
selecting
"MEMORY". Also, you can recall it by
selecting "CALL". Refer to 'Audio Setup memory Recall'
(page 32).
3 Adjust the Audio setup item
Press the [4] or [¢] button.
Each time the button is pressed the setting
switches as shown below.
Adjustment Item Range
High Pass Filter Front
High Pass Filter Rear
High Pass Filter Center*
3
Through/30 — 250 (Hz)
Low Pass Filter Subwoofer 30 — 250 (Hz)
Subwoofer Phase setting Normal/ Reverse
DTA Front/DTA Rear/
DTA Subwoofer
0 — 610 (cm)
DTA Center*
3
0 — 170 (cm)
Bass Center Frequency 60 — 400 (Hz)
Middle Center Frequency 500 (Hz) — 3.15 (KHz)
Treble Center Frequency 4.00 (kHz) — 16.00 (KHz)
Bass Level/ Middle Level/
Treble Level
-9 — +9 dB
Bass Q Factor/ Middle Q Factor/
Treble Q Factor
0.25/ 0.50/ 1.00/ 2.00
SP-LEV Front Left/SP-LEV Front Right
SP-LEV Rear Left/SP-LEV Rear Right
SP-LEV Center*
3
/SP-LEV Subwoofer
-10 — +10
The Adjustment item can also be controlled by the
rotary volume knob. Refer to 'Rotary Volume knob
operation mode select' (page 13).
To get the best sound, first set the "CABIN" and "SP-
SEL" parameters using the 'Audio Setup (Easy mode)'
(page 28). Refer to 'Notes on Sound Management
System' (page 11).
• *
3
Function of the KDC-PSW9527
When the 'Dual Zone System' (page 24) is ON, each of
the following setup is ignored.
- "X'over"/ "EQ" / "DTA"
4 Exit Audio setup mode
Press the [6] ("RTN") button.
Audio Setup Memory (PRO mode)
1
Selects the PRO mode of Audio setup
See the 'Audio Setup' (page 50) and select "Audio
Setup: PRO".
2 Select the source for adjustment
Press the [SRC] button.
3 Select the key function section
Press the [NEXT] button.
Repeatedly press the button until "AD SET" is
displayed above the [3] button.
Refer to 'Notes on Multi-function Key System'
(page 10).
4 Enter Audio Setup mode
Press the [3] ("AD SET") button.
5 Select the Adjustment item section
Press the [NEXT] button.
Repeatedly press the button until the desired
Adjustment item is displayed above the [2] — [5]
button.
6 Select the Audio Setup item for adjustment
Press the [2] — [5] button.
Adjust the audio setup by referring to the 'Audio
Setup (PRO mode)' (page 30).
7 Select the Memory item section
Press the [NEXT] button.
Repeatedly press the button until "MEMORY" is
displayed above the [2] button.
8 Select the Memory item
Press the [2] ("MEMORY") button.
9 Stores the adjusted audio setup value in
memory
Press the [2] ("USER")/ [3] ("INST") button for
at least 2 seconds.
The "MEMORY" display blinks 1 time.
"USER": The values are erased from memory if the
battery is removed or if the reset button
is pressed.
"INST": The values are held in memory even if the
battery is removed or if the reset button
is pressed.
10 Exit Audio Setup mode
Press the [6] ("RTN") button.
KDC-PSW9527(E)_U.S _r5 31 03.11.28, 10:59:33 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-PSW9527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-PSW9527 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-PSW9527

Kenwood KDC-PSW9527 User Manual - German - 66 pages

Kenwood KDC-PSW9527 User Manual - Dutch - 66 pages

Kenwood KDC-PSW9527 User Manual - French - 66 pages

Kenwood KDC-PSW9527 User Manual - Italian - 66 pages

Kenwood KDC-PSW9527 User Manual - Spanish - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info