36062
14
Zoom out
Zoom in
Previous page
1/20
Next page
Anschlüsse / Aansluiten / Collegamenti
14
Das Steuerkabel des Wechslers darf nicht
angeschlossen werden, wenn die Steuereinheit
noch eingeschaltet ist.
Drücken Sie nach dem Einbau unbedingt die
Rückstelltaste.
Das an die Buchsen TO CH2 angeschlossene
Modell wird möglicherweise nicht unmittelbar
nach dem Anschluß erkannt. Schalten Sie in
diesem Fall den Signalquellenmodus auf
TUNER oder eine andere Signalquelle um, und
kehren Sie dann wieder zum Wechslermodus
zurück. Dies ermöglicht den Betrieb durch
Aufteilung des Wechslermodus in 1 und 2.
Lassen Sie die Buchse TO CH2 abgedeckt,
wenn sie nicht benutzt wird.
•Wenn die Steuereinheit nicht über eine
Umschaltfunktion verfügt, darf keine andere
Komponente am TO CH2-Anschluß
angeschlossen werden.
In der Nähe des Wechsler-Ausgangskabels darf
nicht die Radioantenne installiert oder das
Antennenkabel verlegt werden, weil dadurch
Fehlfunktionen dieses Gerätes verursacht
werden können.output cable, for this could
cause malfunction with this unit.
•Verbind de bedieningskabel voor de wisselaar
niet wanneer de bedieningseenheid is
ingeschakeld (ON).
•Druk na het installeren op de terugsteltoets.
Het model dat op de TO CH2 aansluitingen is
verbonden wordt mogelijk niet direct na het
verbinden herkend. U moet in dat geval eerst
even naar de TUNER of een andere
ingangsbron schakelen en dan weer terug naar
de functie voor de CD-wisselaar gaan. Door
deze handeling kan een onderscheid tussen
wisselaarfunctie 1 en 2 worden gemaakt.
Laat de dop op de TO CH2 aansluiting indien u
geen verbinding met deze aansluiting maakt.
Indien de in gebruik zijnde bedieningseenheid
geen schakelfunktie heeft dient u geen
verbinding met de TO CH2 aansluiting te
maken.
Installeer geen antenne of radiotoestel en leg
geen antenne bij de uitgangskabel van de
diskwisselaar daar dit de goede werking van dit
toestel zou kunnen beïnvloeden.
Non collegare il cavo di controllo dell'unità
cambia CD mentre l'unità di controllo è accesa.
Accertarsi di premere il pulsante di
inizializzazione dopo l'installazione.
Il modello collegato alle prese TO CH2
potrebbe non essere riconosciuto subito dopo il
collegamento. In questo caso, commutare la
fonte su TUNER o un'altra fonte e quindi
ritornare al modo del cambiatore. Ciò rende
possibile il funzionamento dividendo il
cambiatore in 1 e 2.
Se il terminale TO CH2 non è in uso, lasciarlo
coperto dal cappuccio.
Se l’unità di controllo in uso non possiede una
funzione di selezione del cambia CD, non
collegare alcuna unità al terminale TO CH2.
Non installate un’antenna radio e non
stendetene il cavo vicino al cavo di uscita del
caricabatterie, dato che la cosa potrebbe
influenzare negativamente il funzionamento di
quest’unità.
2PRECAUZIONE
2LET OP
2ACHTUNG
90
45
0
D Wechsler-Steuerkabel (5 m)
Kabel voor bedieningseenheid voor
CD-wisselaar (5 meter)
Cavo di controllo dell’unità cambia
dischi (5 m)
TO H/U
TO CH2
Wechsler-Steueranschluß /
Aansluiting bedieningseenheid voor CD-wisselaar /
Terminale di controllo dell’unità cambia dischi
Steuergerät (Sonderzubehör) /
Bedieningseenheid (los
verkrijgbaar) /
Unità di controllo (opzionale)
Sonderzubehör / los verkrijgbaar /
opzionale
KDC-CPS89(EW)(G,N,I) 02.9.19 11:56 AM Page 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-CPS89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-CPS89 in the language / languages: German, Italian as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-CPS89

Kenwood KDC-CPS89 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info