121767

Kenwood KDC-BT6544UY Manual

24
Zoom out
Zoom in
Previous page
1/48
Next page
24
|
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
X’Over setting
You can set a X’Over value for the speakers;
Setting speaker Display Range
Front
“FRONT”
High Pass
Filter
“FC”/
“HPF F”
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
Rear
“REAR”
High Pass
Filter
“FC”/
“HPF R”
THRU (Through) /40 /60 /70 /80
/100 /120 /150 / 180/ 220 Hz
Subwoofer
“SUB-W”
Speaker
Size
“FC”/
“LPF SW”
40/ 60/ 70/ 80/ 100/ 120/150 /
180/ 220/ THRU (Through) Hz
Phase “FC”/
“SW PHASE”
REVERSE (180°)/ NORMAL (0°)
1 Enter X’Over setting mode
Select “DSP” > “SETUP” > “X’OVER”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Set the X’Over value
Turn the [AUD] knob and push the center when
the desired value is displayed.
4 Exit X’Over setting mode
Press the [SEARCH] button.
Audio Adjustments (DSP)
Function of KDC-BT6544U/BT6544UY
Equalizer Control
You can adjust following Equalizer Control items.
iPod Equalizer can be set after connecting iPod and
selecting “iPod” in <System Q>. Select from the 22
equalizer types;
Adjustment Item Display Range
Preset
memory
“PRESET”
System Q “EQ” “NATURAL” (Natural)/ “USER”/
“ROCK” (Rock)/ “POPS” (Pops)/
“EASY” (Easy)/ “TOP40”
(Top 40)/
“JAZZ” (Jazz)/ “GAME” (Game)/
“iPod”
Equalizer
agjust
“MANUAL”/
“BAND”
Center
Frequency
“F0” Refer to the followings.
Quality “Q” 0.25/ 0.50/ 1.00/ 2.00
Level “GAIN” –9/ -7/ -5/ -3/ -2/ -1/ 0/ +1/
+2/ +3/ +5/ +7/ +9
• The frequency which can be selected by each Frequency
band is shown below.
Band Frequency
“BAND1” 60/ 100/ 160/ 250/ 400 Hz
“BAND2” 630/ 1k/ 1.6k/ 2.5k Hz
“BAND3” 4/ 6.3/ 10/ 16 kHz
1 Enter Equalizer Control mode
Select “DSP” > “CONTROL” > “EQ”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the item you want to set
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Set the value
Turn the [AUD] knob and push the center when
the desired item is displayed.
iPod Equalizer
1. Enter iPod Equalizer mode
Press the [AUD] button.
2. Set the value
Turn the [AUD] knob and push the center
when the desired item is displayed.
4 Exit Equalizer Control mode
Press the [SEARCH] button.
Preset position selection
According to the listening position, select the
position from the following settings so that the
normal position of the sound environment can
be compensated in accordance with the selected
position;
Compensation seat Range
Not compensating. “ALL”
Front-Left seat “F-L”
Front-Right seat “F-R”
Front seat “F-ALL”
1 Enter Position setting mode
Select “DSP” > “CONTROL” > “POSITION” >
“PRESET”.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select the seat you want to compensate
Turn the [AUD] knob and push the center when
the desired item is displayed.
3 Exit Position setting mode
Press the [SEARCH] button.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT6544UY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT6544UY in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info