121771
21
Zoom out
Zoom in
Previous page
1/48
Next page
English
|
21
Function of KDC-BT6044/BT6144/W5544U/W5644U
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leval.
Bass level
Adjustment Item Display Range
Bass Center Frequency “BASS F” 40/50/60/70/80/100/
120/150 Hz
Bass Q Factor “BASS Q” 1.00/1.25/1.50/2.00
Bass Extend “BASS EXT” OFF/ON
Middle level
Adjustment Item Display Range
Middle Center Frequency “MID F” 0.5/1.0/1.5/2.0 kHz
Middle Q Factor “MID Q” 1.0/2.0
Treble level
Adjustment Item Display Range
Treble Center Frequency “TRE F” 10.0/12.5/15.0/17.5 kHz
1 Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 20).
2 Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the [AUD] knob.
4 Adjust the Detail Audio item
Turn the [AUD] knob.
5 Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
When you set the Bass Extend to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob or [0]
button.
Audio Setup
You can set Sound system , such as follows;
Adjustment Item Display Range
Front High Pass Filter* “HPF” F Through/40/60/80/100/120/
150/180/220 Hz
Rear High Pass Filter* “HPF R” Through/40/60/80/100/120/
150/180/220 Hz
Low Pass Filter* “LPF SW” 50/60/80/100/120/ Through
Hz
Subwoofer Phase* “SW PHASE” Reverse (180°)/ Normal (0°)
Volume offset “V-OFFSET” –8 — ±0 (AUX: -8— +8)
Dual Zone System “2ZONE” OFF/ON
*Function of KDC-BT6044/BT6144/W5544U/W5644U.
Volume offset: Sets each source’s volume as a difference
from the basic volume.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately.
- Set up the channel of sub source by “ZONE2” of
<Function Control> (page 6).
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 20) or [5]/[] button on the remote control
(page 33).
- The Audio Control has no effect on sub source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Setup mode
Press the [AUD] knob for at least 1 second.
3 Select the Audio Setup item to adjust
Press the [AUD] knob.
4 Adjust the Audio setup item
Turn the [AUD] knob.
5 Exit Audio Setup mode
Press the [AUD] knob for at least 1 second.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT6144 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT6144 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-BT6144

Kenwood KDC-BT6144 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info