121769
36
Zoom out
Zoom in
Previous page
1/48
Next page
36
|
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
Appendix
For operating KCA-BT200 (Optional)
For operation refer to Model-B-2 in the Instruction
Manual of KCA-BT200, and the table below.
Notation used in the KCA-BT200
Instruction Manual
Operation
[38] button [AUD] knob
Control knob [AUD] knob
Press the [AUTO]/[TI] button Press the [38] button for at
least 1 second.
Control knob knob towards up or down [AUD] knob knob towards up
or down
Control knob knob towards left or right [AUD] knob knob towards left
or right
For operating KCA-BT100 (Optional)
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
<Dialing by Using the Quick Dialing Function>
1. Press the [AUD] knob. Select the “NUMBER DIAL
display.
2. Press the [SEARCH] button.
3. Select the number to recall by turning the [AUD]
knob.
4. Press the [AUD] knob.
<Registering to the Preset Dial Number List>
1. Operation is the same. Refer to the instruction
manual of KCA-BT100.
2. Press the [SEARCH] button.
3. Select the number to memory by turning the
[AUD] knob.
4. Press the [AUD] knob for at least 2 seconds.
<Deleting a Registered Cell-Phone>
1–3. Operation is the same. Refer to the instruction
manual of KCA-BT100.
4. Press the [AUD] knob at least 1 second.
5. Press the [SEARCH] button.
<Menu System>
For how to operate Menu, refer to <Function
Control> in this instruction manual.
About display
Cell-Phone Status is displayed in the status display of
this unit.
Moreover, some displays are different from the
description of KCA-BT100 Instruction Manual.
Displays of KCA-BT100 Instruction
Manual
Actual displays on this unit
“DISCONCT” “HF DISCONCT”
“CONNECT” “HF CONNECT”
“PHN-DEL “DEVICE DEL
“P-STATUS” “DVC STATUS”
“BT-CON Y” “HF CONNECT Y”
“BT-CON N” “HF CONNECT N”
Menu Glossary
AF (Alternative Frequency)
When the reception is poor, automatically alternate to
another frequency broadcasting the same program in
the same RDS network with better reception.
• AMP
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
AUTO ANS (Setting the Time Interval for
Automatic Answer)
This function automatically answers (responds
to) a call after lapse of the preset time interval for
automatic answer.
“OFF” : Does not answer the phone call
automatically.
“0” : Automatically answers the phone call at once.
“1s”“99s” : Automatically answers the phone call
after lapse of 1 – 99 seconds.
If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
This function does not work for call waiting.
• AUX
When this is set to ON, AUX source can be selected.
ON1: Allows AUX source to be selected. Use this
setting when the built-in AUX terminal is
connected to the external equipment all the
time.
ON2: Activates the attenuator function when
turning on the power with AUX source
selected. Cancel the attenuator function
by turning the volume knob clockwise
when listening to the audio of the external
equipment.
OFF: Disable AUX source selection. Use this setting
when the built-in AUX terminal is not used.
CALL BEEP (Setting the Beep of the Incoming Call)
You can output a beep from the speaker when a
call comes in.
“ON” : Beep is heard.
“OFF” : Beep is canceled.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT6044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT6044 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info