121769
22
Zoom out
Zoom in
Previous page
1/48
Next page
22
|
KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
Audio Adjustments
Function of KDC-BT6044/BT6144/W5544U/W5644U
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type Display
OFF “SP SEL OFF”
For 5 & 4 in. speaker “SP SEL 5/4”
For 6 & 6x9 in. speaker “SP SEL 6x9/6”
For the OEM speaker “SP SEL OEM”
1 Enter Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Speaker Setting mode
Press the [AUD] knob.
3 Select the Speaker type
Turn the [AUD] knob.
4 Exit Speaker Setting mode
Press the [AUD] knob.
Function of KDC-BT6044/BT6144/W5544U/W5644U
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 20)
- <Audio Setup> (page 21)
2 Enter Audio Preset Memory mode (Other than
Standby mode)
Select “MENU” >AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the Audio Preset Memory
Turn the [AUD] knob.
Select the “MEMORY display.
4 Determine whether to put the Audio Preset in
the memory
Press the [AUD] knob.
Function of KDC-BT6044/BT6144/W5544U/W5644U
Audio Preset Recall
Recalling the sound setup registered by <Audio
Preset Memory> (page 22).
1 Select the source
2 Enter Audio Preset Recall mode (Other than
Standby mode)
Select “MENU” >AUDIO PRESET”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control items, refer to
<Function Control> (page 6).
3 Select the Audio Preset Recall
Turn the [AUD] knob.
Select the “RECALL display.
4 Determine whether to recall the Audio Preset
Press the [AUD] knob.
5 Recall the Audio Preset
Turn the [AUD] knob to select “YES, and then
press the [AUD] knob.
“COMPLETE” is displayed.
6 Exit Audio Preset mode
Press the [SERACH] button twice.
The User memory of “SYSTEM Q” in <Audio Control>
(page 20) is changed to the value which was recalled.
The source tone memory item of <Audio Control> (page
20) is changed to the value which was recalled by the
selected source.
5 Put the Audio Preset in the memory
Turn the [AUD] knob to select “YES, and then
press the [AUD] knob.
“COMPLETE” is displayed.
6 Exit Audio Preset mode
Press the [SERACH] button twice.
Register 1 pair of Audio Preset Memory. You cannot
register by the source.
When you press the Reset, all the sources will be the
setting value which is registered.
The following items cannot be registered.
Volume, Balance, Fader, Volume offset, Dual Zone System,
Rear Volume
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT6044 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT6044 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info