672748
26
Zoom out
Zoom in
Previous page
1/128
Next page
22
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Sound cannot be heard.
The unit does not turn on.
Information shown on the
display is incorrect.
Clean the connectors.
( 24)
The unit does not work at all. Reset the unit.
( 3)
Radio
Radio reception is poor.
Static noise while listening
to the radio.
Connect the antenna firmly.
CD/USB /iPod
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit.
( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as you
intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
“LOADING” appears when you
enter search mode by pressing
.
This unit is still preparing the iPod/iPhone music list.
It may take some time to load, try again later.
Symptom Remedy
CD/USB /iPod
Correct characters are not
displayed (e.g. album
name).
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
Depending on the display language you have selected
( 5)
, some characters may not be displayed
correctly.
“NA FILE” Make sure the disc contains supported audio files.
( 25)
“NO DISC” Insert a playable disc into the loading slot.
“TOC ERROR” Make sure the disc is clean and inserted properly.
“PLEASE EJECT” Reset the unit. If this does not solve the problem,
consult your nearest service center.
“NO DEVICE” Connect a USB device, and change the source to USB
again.
“COPY PRO” A copy-protected file is played.
“UNSUPPORTED DEVICE”
Check whether the connected device is compatible
with this unit and ensure the file systems are in
supported formats.
( 25)
Reattach the device.
“UNRESPONSIVE DEVICE” Make sure the device is not malfunction and reattach
the device.
“USB HUB IS NOT
SUPPORTED”
This unit cannot support a USB device connected via a
USB hub.
The source does not
change to “USB” when
you connect a USB device
while listening to another
source
“USB ERROR” appears
The USB port is drawing more power than the design
limit. Turn the power off and unplug the USB device.
Then, turn on the power and reattach the USB device.
If this does not solve the problem, turn the power off
and on (or reset the unit) before replacing with another
USB device.
ENGLISH
JS_KWD_KDC_320UI_EN_EN_7.indd 22JS_KWD_KDC_320UI_EN_EN_7.indd 22 7/7/2017 1:54:32 PM7/7/2017 1:54:32 PM
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT520U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT520U in the language / languages: English, German, Italian as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-BT520U

Kenwood KDC-BT520U User Manual - Dutch, French, Portuguese, Spanish - 128 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info