796172
19
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH 11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KDC-BT460U”) on the
Bluetooth device.
“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME
KNOB” appears on the display.
For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
“BT1” and/or “BT2” indicator on the display window lights up.
This unit supports Secure Simple Pairing (SSP).
Up to five devices can be registered (paired) in total.
Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE]
on page14.
A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see
[PHONE SELECT]
or
[AUDIO SELECT]
in
[BT MODE]
. (Page 14)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page15)
Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
Refer to the instruction manual of the Bluetooth device for more
information.
Depending on the Bluetooth version, operating system and the firmware
version of your mobile phone, Bluetooth features may not work with this
unit.
Be sure to turn on the Bluetooth function of the device to make the
following operations.
Signal conditions vary depending on the surroundings.
Bluetooth — Connection
Supported Bluetooth profiles
Hands-Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Serial Port Profile (SPP)
Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
Sub Band Codec (SBC)
Connect the microphone
Adjust the
microphone angle
Secure using cord
clamps (not supplied)
if necessary.
Microphone
input jack
Microphone
(supplied)
Rear panel
Bluetooth®
JS_KWD_KDC_BT460U_EN_EN.indd 11JS_KWD_KDC_BT460U_EN_EN.indd 11 2/5/2021 4:39:54 PM2/5/2021 4:39:54 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-BT460U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-BT460U in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info