41277
59
Zoom out
Zoom in
Previous page
1/64
Next page
— 59 —— 59 —
? The Touch Sensor Tone doesn’t sound.34
The preout jack is being used.
The Touch Sensor Tone can’t be output from the preout jack.
? Even though Synchronize Clock is ON, the clock can’t be adjusted.35
The received RDS station isn’t sending time data.
Receive another RDS station.
? The Dimmer function doesn’t work. 38-1
The Dimmer wire isn’t connected correctly.
Check the Dimmer wire connection.
? The panel is not hidden even when the power is turned off. 38-3
The protection function for preventing fingers or other things from
getting caught in between the panel and this unit has been activated.
Turn off the power again.
?
Sound is interrupted when Dual Zone System is set to ON.38-4
When Dual Zone System is set to ON while the Menu system’s <AF
(Alternative Frequency)> (page 48) is set to ON, the sound quality
may be adversely affected if the internal source is set to the tuner.
---
?
There are no audio control effects.
WOW item on <Audio Control> (page 12) and SRS WOW item on
<System Q> (page 12) have no effect in rear output.
---
Tuner source
? Radio reception is poor.39
The car antenna is not extended.
Pull the antenna out all the way.
The antenna control wire is not connected.40
Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
? The desired frequency can’t be entered with the Direct Access
Tuning.41
A station that can’t be received is being entered.
Enter a station that can be received.
You’re trying to enter a frequency with a 0.01 MHz unit.42
What can be designated in the FM band is to 0.1 MHz.
? It isn't the set Traffic information sound volume. 43
The set sound volume is less than the tuner sound volume.
If the tuner sound volume is louder than the set sound volume,the
tuner sound volume is used.
Disc source
? "AUX1" is displayed without achieving External disc control mode.50
Unsupported disc changer is connected.51
Use the disc changer mentioned in the IMPORTANT
INFORMATION of the section on <Safety precautions> (page 3).
? The specified disc does not play, but another one plays instead.52
The specified CD is quite dirty.
Clean the CD.
The disc is loaded in a different slot from that specified.54
Eject the disc magazine and check the number for the specified
disc.
The disc is severely scratched.55
Try another disc instead.
? A CD ejects as soon as it is loaded.62
The CD is quite dirty.63
Clean the CD, referring to the CD cleaning of the section on
<About CDs> (page 9).
KDC-PSW9524_U.S_r5.pg 02.12.13 2:06 PM Page 59
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-8024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-8024 in the language / languages: English as an attachment in your email.

The manual is 2,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-8024

Kenwood KDC-8024 User Manual - German - 62 pages

Kenwood KDC-8024 User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info