165367
35
Zoom out
Zoom in
Previous page
1/48
Next page
Function of the KDC-PS9070R
You can adjust the Dimmer level of the unit separately when
your car's light switch has been turned on or off.
To adjust the Dimmer level:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Dimmer level
adjustment function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Bright ##" in the display,
indicating that the Dimmer level adjustment mode is on.
Switching settings
Press either the AM or FM button.
Press the FM button to change the setting values higher, and
press the AM button to change them lower. Settings may be
made from 0 to 10.
Press the MENU button to end the menu mode.
The "##" display in the Dimmer level adjustment mode will differ
depending on the setting. The initial setting value whilst your
car's light switch is turned on is "5", and whilst the light is turned
off is "10".
NOTE
4
3
2
1
Dimmer level adjustment
This function allows you to turn off the lower part of the
display if there is too much information in the display.
Turning the Black Mask On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Black Mask function
appears in the display.
Pressing the 4 button results in the functions being switched
in the reverse order.
The function setting is indicated by "BLK MASK ON" or "BLK
MASK OFF" in the display, indicating that the Black mask is on
or off, respectively.
"BLK MASK ON" (The display will turn on by using only the
upper part of the display and the *ATT
indicator.)
*...
KDC-8070R/8070W/7070R only
"BLK MASK OFF" (The display will turn on by using the whole
part of the display.)
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1
Black Mask
Press the FM button to change the setting number of times
higher, and press the AM button to change it lower. Settings
may be made from 1 to 3.
Press the MENU button to end the menu mode.
The "#" display in the Manual Open Switch Setting mode will
differ depending on the setting. The initial setting value is "1".
NOTE
4
— 35 —
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kdc 7070 r dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kdc 7070 r dab in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info