165367

Kenwood kdc 7070 r dab Manual

30
Zoom out
Zoom in
Previous page
1/48
Next page
Shut down the audio system temporarily whenever an
incoming call is received.
The function will not work if a cable is not connected to the car
NOTE
TEL Mute
The display dims when the car's lights are turned on.
The dimmer function is not available for units if the dimmer cable
is not connected.
NOTE
Automatic Dimmer Function
You can dim the display.
The dimmer function is not available for units if the dimmer cable
is not connected.
Turning Dimmer On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Dimmer function
appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "Dimmer ON" or "Dimmer
OFF" in the display, indicated that the current dimmer setting is
on or off, respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1
NOTE
Dimmer
When the KENWOOD Navigation System is connected, an
interruption of the audio guide results in the temporary
lowering of the audio level.
The Navigation mute function cannot be used unless a TEL mute
cable is connected to the KENWOOD Navigation System.
NOTE
Navigation Mute Function
Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately. The
factory default is rear preout.
Switching the preout: (KDC-8070R/8070W only)
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Switching preout
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "SWPRE Rear" or "SWPRE
N-Fad" in the display, indicating that the current preout is rear or
non-fading, respectively.
"SWPRE Rear" (Rear preout)
"SWPRE N-Fad" (Non-fading preout)
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
You cannot use the high-pass filter with non-fading preout.
Turning non-fading output On/Off :
Hold down the NF button for one second or more to set the
function ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
NOTE
4
3
2
1
Switching preout
Other features
— 30 —
English
Function of the KDC-PS9070R / KDC-8070R / KDC-8070W
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kdc 7070 r dab at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kdc 7070 r dab in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info