Manual Kenwood kdc 4070 r a g v (page 26 of 28) (English)

165340

Zoom out

Zoom in

1/28

English

— 26 —

Removing the hard rubber frame

■

When the lower level is removed, remove the upper two

locations.

The frame can be removed from the top side in the same

manner.

NOTE

Catch

Lock

Engage the catch pins on the removal tool and remove the two

locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Removing the Unit

■

Lower the removal tool

toward the bottom, and pull

out the unit halfway whilst

pressing towards the

inside.

Pull the unit all the way out

with your hands, being

careful not to drop it.

Be careful to avoid injury from the catch pins on the removal tool.

2CAUTION

Catch facing up

Refer to the section “Removing the hard rubber frame” and

then remove the hard rubber frame.

Remove the screw (M4

×8) on the back panel.

Insert the two removal tools deeply into the slots on each side,

as shown.

Accessory2 Removal tool

Installation

Screw (M4X8)

(commercially

available)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kdc 4070 r a g v in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood kdc 4070 r a g v Manual

Product: