606313
15
Zoom out
Zoom in
Previous page
1/60
Next page
ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Sound cannot be heard.
The unit does not turn on.
Information shown on the
display is incorrect.
Clean the connectors. (
14
)
The unit does not work at all. Reset the unit. (
3
)
Radio
Radio reception is poor.
Static noise while listening
to the radio.
Connect the antenna firmly.
CD / USB / iPod
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful
not to drop the disc when it is ejected. If this does not
solve the problem, reset the unit. (
3
)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as
you intended them to play.
Playback order is determined when files are recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct.
This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album name).
This unit can only display uppercase letters, numbers,
and a limited number of symbols. (
5
)
Symptom Remedy
CD / USB / iPod
“NA FILE” Make sure the disc contains supported audio files.
(
14, 15
)
“NO DISC” Insert a playable disc into the loading slot.
“TOC ERROR” Make sure the disc is clean and inserted properly.
“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult
your nearest service center.
“READ ERROR” Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
“NO DEVICE” Connect a USB device, and change the source to USB again.
“COPY PRO” A copy-protected file is played.
“NA DEVICE”
Connect a supported USB device, and check the connections.
“NO MUSIC” Connect a USB device that contains playable audio files.
“iPod ERROR”
Reconnect the iPod.
Reset the iPod.
ANDROID
Sound cannot
be heard during
playback.
Sound output only
from the Android
device.
Reconnect the Android device.
If in [
HAND MODE
], launch any media player application
on the Android device and start playback.
If in [
HAND MODE
], relaunch the current media player
application or use another media player application.
Restart the Android device.
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. (
15
)
Cannot playback at
[
BROWSE MODE
].
Make sure KENWOOD MUSIC PLAY APP is installed on the
Android device. (
8
)
Reconnect the Android device and select the appropriate
control mode.
If this does not solve the problem, the connected Android
device does not support [
BROWSE MODE
]. (
15
)
JS_KWD_KDC_200UB_ENE2N_EN_7.indd 13JS_KWD_KDC_200UB_ENE2N_EN_7.indd 13 31/7/2015 9:15:26 AM31/7/2015 9:15:26 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood KDC-100UG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood KDC-100UG in the language / languages: English, German as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood KDC-100UG

Kenwood KDC-100UG User Manual - Dutch, French, Portuguese, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info