Manual Kenwood kac 526 (page 30 of 76) (English)

165284

Zoom out

Zoom in

1/76

— 30 —

English

This item allows you to adjust the output level of each

channels of speaker using the built-in test signal.The output

level must be adjusted from the listening position.The factory

setup is “0 dB” for all types of speakers.

Test Signal:

Each time you press the 38 button to switch the noise

sequencer on and off.

Not available during the Dual zone system is on.

Adjusting the Front Right Speaker:

"CH LEV F-R" : -10dB – 0 – +10dB

Adjusting the Front Left Speaker:

"CH LEV F-L" : -10dB – 0 – +10dB

Adjusting the Rear Right Speaker:

"CH LEV R-R" : -10dB – 0 – +10dB

You cannot operate when the “Multi CH“ is set to “3/0“ or

“2/0“ (page 29 ) <When playing with multi-channels>.

Adjusting the Rear Left Speaker:

"CH LEV R-L" : -10dB – 0 – +10dB

You cannot operate when the “Multi CH“ is set to “3/0“ or

“2/0“ (page 29 ) <When playing with multi-channels>.

Adjusting the Center Speaker:

"CH LEV CEN" : -10dB – 0 – +10dB

• You cannot operate when the “PCM Center“ is set to "OFF"

( page 29 ) <When playing with the 2ch PCM signal>.

• You cannot operate when the “Multi CH“ is set to “2/2“ or

“2/0“ ( page 29 ).

• Not available during the Dual zone system is on.

NOTE

10.Setting the Channel Balance

Audio effect control features

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kac 526 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood kac 526 Manual

Product: