165284
12
Zoom out
Zoom in
Previous page
1/76
Next page
This function switches the type of information on the upper
part display when the display mode is "Display Type A" or
"Display Type B" .
Press the S.A button to enter the display control mode.
Each time you press the 4 or ¢ button, the upper part
display changes as follows:
In Tuner mode:
Displaying Frequencies:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
If the RDS station currently tuned to is transmitting no text
whilst the Radio Text Display mode is turned on, "NO TEXT"
will appear in the display. Whilst awaiting reception, "Waiting"
will be displayed.
To prevent accidents, drivers should not look at the display
whilst driving.
2WARNING
NOTE
Band display
+
Programme Service name(only during RDS station reception)/
Radio text (only during RDS station reception)
Band display + Station frequency
2
1
Switching the Upper Part Display
See "Icon/Spectrum analyzer Select" in the menu setting (page
57).
You cannot switch into the "Display Type C" during the standby
mode.
When discs recorded by DTS are played spectrum analyzer isnt
displayed.
You can select the display mode of this unit.
Changing the Display Mode:
Each time you press the DISP button, the display mode
switches as follows:
You can switch display information between the upper part
display, lower part display, and full screen display. For further
information, see "Switching the Upper Part Display" (page 12),
"Switching the Lower Part Display" (page 14), "Switching Full-
Screen Display" (page 15) respectively.
You can switch the Icon/Spectrum analyzer.
NOTE
"Display Type A"
Divide the display into the upper and lower parts
to separately provide different information.
"Display Type C"
Use the entire display to provide a single type
of information.
"Display Type B"
The display will turn on by using only the upper part
of the display and clock.
The upper part display
The lower part display
The Icon/
Spectrum
analyzer
The upper part display
Clock
The full screen display
Switching Display Mode
General features
12
English
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood kac 526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood kac 526 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info