160702
43
Zoom out
Zoom in
Previous page
1/50
Next page
43
English
Maintenance
Handling of iPod
Handling precautions
Be sure to read the instruction manuals provided with
your iPod.
The iPod is not provided with this system.
The saved data may be lost depending on the operating
situations of the iPod. Kenwood will not assume any
liabilities for the damage incurred due to loss of saved data.
Usable iPod
To control an iPod from the main unit or remote control
unit, the PAD-iP7 iPod Dock is necessary.
For the usable iPod models, refer to the manual for the
PAD-iP7.
Handling of USB device
Handling precautions
Be sure to read the instruction manuals provided with
each USB device.
The USB device is not provided with this system.
The [USB] connector on the rear of this unit is USB2.0 (Full
speed) compatible.
It is not permitted to connect a USB device through a USB
hub.
The data saved in the USB device may be lost depending
on the usage conditions. Kenwood will not assume any
liabilities for the damage incurred due to loss of saved data.
Usable USB devices
The following restrictions are applicable to the type and
operating method of the USB device.
The USB device should be USB mass storage class
compatible. For whether each USB device is compatible
with the USB mass storage class, consult its dealer.
The maximum current drain should be no more than "500
mA".
If a USB device other than speci ed above is used, the
music  les may be unable to be played correctly. Also,
note that even a USB device complying with the above
speci cations may be unable to play certain music  les
depending on the type or condition of the music  les.
Caution for Transport or Movement
Before transporting or moving the system, prepare it as
described below.
1
Disconnect the external components including the
USB device, and also take out the disc.
2
Press [CD
E
] and con rm that "NO DISC" is
displayed.
3
Wait a while, and then turn the system OFF.
4
If any other external component is connected, make
sure that it is turned OFF before disconnecting the
connection cable.
Memory Backup
Even when the power plug is unplugged from the mains
outlet, the setups of the unit are retained for about a day.
The backed up setups are as follows.
Sound and system setups
Input source selection
Volume setting
Input level setting
D-BASS and TONE settings
TIMER SET setting
DIMMER setting
DISP. SAVER setting
A.P.S. setting
Rec Out LEVEL setting
Tuner setups
Preset stations
Tuning mode
(Auto/manual tuning)
Receiving band
Receiving frequency
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood k 323 s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood k 323 s in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info