159527
81
Zoom out
Zoom in
Previous page
1/84
Next page
81
Knowledge sections
Important Items
Symptom Cause
Symptoms related to MD standard
"DISC FULL" is displayed while the disc still has
a remaining recordable time.
The possible recording time does not increase
even when a short track is erased.
Tracks can not be connected.
The total of the recorded time and remain-
ing recording time does not match the to-
tal recording time of the MD (60, 74 or 80
minutes).
When search is performed in a track which has
been compiled by editing, the sound is some-
times interrupted.
The track numbers are not assigned correctly.
READING is displayed for an abnormally long
time.
The time display becomes inaccurate with a
monaurally recorded disc.
Input of 1792 title characters is not possible.
÷ More than 255 tracks (track No. 256 or more) cannot be re-
corded. (There may be also cases in which recording is impos-
sible while the track number is less than 256.)
In such a case, the REMAIN time display shows "0:00".
÷ When the remaining time of the entire disc is less than 12 sec,
the remaining time indication on the display becomes "0:00".
When the total time of the deleted tracks exceeds 12 sec, the
display changes to the recordable time.*1
÷ When a short track is deleted on a repeatedly edited disc, the
remaining time may not increase.
÷ Connection of the track resulting from edit processing may not
be possible.
÷ It is not permitted to combine two tracks which are recorded in
different recording modes.*2
÷ As the MD is recorded based on minimum recording units of 2
seconds, the consumed disc space may not coincide with the
displayed time information.*3
÷ This derives from the restriction in the MD system standard and
not a malfunction.
÷ Depending on the contents of the recorded source (CD etc.), the
track numbers may not be assigned correctly.
÷ When a new recordable MD (with nothing recorded) is inserted,
"READING" is displayed longer than usual.
÷ Monaural recording and stereo recording are executed according
to different formats. This is not a malfunction.
÷ The title recording area is used in units of 7 characters, so that
input of 1792 characters may not be possible.
÷ Load a prerecorded disc or playback-only disc.
÷ Change the position of the write protect tab to the write position
or use a recordable disc.
l
÷ Set the input selector to the source to be recorded. º
÷ Adjust the AUX input level. Ø
÷ The recording level is not set properly (when the AUX input is
recorded).
Adjust the AUX input level.
Ø
÷ Install the unit at a position apart from an electric appliance or TV set.
Sound is not output even when the play key
is pressed.
Recording is not possible
Recording level is too low. (when the AUX in-
put is recorded).
Sound is distorted.
Noise is noticeable.
RemedySymptom
MD recorder section (other symptoms)
*1. When the recording mode is STEREO (24 sec. when it is LP2 or MONO, 48 sec. when it is LP4).
*2. STEREO, LP2, LP4 and MONO modes.
*3. When the recording mode is STEREO (4 sec. when it is LP2 or MONO, 8 sec. when it is LP4).
In case of difficulty
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood hm 383 md at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood hm 383 md in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info