159035
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
EN
Timer setting
The system can switch on to CD, TUNER or TAPE
mode automatically at a preset time, serving as
an alarm to wake you up.
The timer recording of radio programs onto a
cassette tape is also possible.
Important!
Before setting the timer, ensure that the clock
is set correctly.
When setting the timer (playback or recording)
for TUNER, be sure to select the station you
wish to tune in beforehand.
1 Press timer set button (TIMER SET button
on the remote control) to TIMER setting mode.
The icon “TIMER ON” will start flashing on the
display.
2 Press program button (PROGRAM button on
the remote control).
The hour indication will start flashing.
3 Set the time to start playback.
Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to set
timer start hours and press program button
(PROGRAM button on the remote control) to
store the setting.
Repeat the same procedure to set the minutes.
4 Press timer set button (TIMER SET button
on the remote control).
The icon “TIMER OFF” will start flashing.
5 Repeat the step 2 and 3 to set the time to stop
the timer (off time).
6 Press timer set button (TIMER SET button
on the remote control).
The icon “TIMER” will flash and the source
display will appear.
7 Press program button (PROGRAM button on
the remote control).
View clock
The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode (CD, TUNER
or TAPE), press timer set button (TIMER SET
button on the remote control). The clock will be
displayed.
If the clock has not been set, "0:00" will start
flashing.
Clock setting
Before carrying out the clock setting, ensure
that the system is in standby mode.
1 Press program button (PROGRAM button on
the remote control) to enter the hour setting
mode.
The hour indication will start flashing.
2 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to set
the hours.
3 Press program button (PROGRAM button on
the remote control) to enter the minute setting
mode.
The minute indication will start flashing.
4 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to set
the minutes.
5 Press program button (PROGRAM button on
the remote control) to store the setting.
The clock will start working.
To exit without storing the setting, turn on the
system.
Notes:
•The clock setting will be erased when the power
cord is disconnected or a power failure occurred.
•The clock can be set in either 12 or 24-hour mode.
To change the mode : When the system is in standby
mode, press TUNER/band button while pressing
6 PLAY/PAUSE button.
Clock/timer operation
5467/08-20/EN 04.5.26, 3:06 PM14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood hm 337 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood hm 337 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood hm 337

Kenwood hm 337 User Manual - German, Dutch, French, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info