159035
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
EN
6 Press program button (PROGRAM button on
the remote control) again to store the radio
station.
Repeat steps 3 to 6 to store other preset radio
stations.
Note:
During program, if no button is press within 20 seconds,
the system will exit program mode automatically.
Tuning to a preset radio station
Press p.call + button (P. CALL + button on the
remote control) or p.call – button (P. CALL – button
on the remote control) to select the desired preset
number.
•The preset number and radio frequency will
appear on the display.
STEREO/MONO
Press the STEREO/MONO button on the remote
control to select stereo or mono mode.
When stereo mode is selected, the icon
"STEREO" will appear on the display (if current
station is FM stereo).
Note:
You are able to select stereo or mono mode in FM band
only.
Using RDS (Radio Data System)
(For the Europe only)
RDS is a system that transmits useful information
(in the form of digital data) for FM broadcasts along
with the broadcast signal. Tuners and receivers
designed for RDS reception can extract the
information from the broadcast signal for use with
various functions, such as automatic display of the
station name.
RDS functions:
PTY (Program TYpe Identification) Search
Automatically tunes to a station that is currently
broadcasting the specified program type (genre).
PS (Program Service Name) Display:
Automatically displays the station name
transmitted by the RDS station.
Using the radio
Tuning in radio stations
1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select TUNER
mode.
The current radio frequency will be displayed.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3 Press and hold 4 or ¢ button (4 or ¢
SEARCH/TUNING button on the remote
control).
Repeat this procedure until the desired station
is reached.
To tune to a weak station briefly press 4 or
¢ button (4 or ¢ SEARCH/TUNING
button on the remote control) repeatedly until
the display shows the desired frequency or
when the best reception has been obtained.
Storing preset
You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio
stations selected, the preset number appears on
the display.
1 Press TUNER/band button (TUNER/BAND
button on the remote control) to select TUNER
mode.
2 Press TUNER/band button (TUNER/BAND
button on the remote control) to select the
desired waveband: FM or AM.
3 Press 4 or ¢ button (4 or ¢ SEARCH/
TUNING button on the remote control) to tune
to the desired frequency.
4 Press program button (PROGRAM button on
the remote control) so that “– –” will start
flashing.
5 If you wish to store the radio station to another
preset number, p.call + button (P. C A LL +
button on the remote control) or p.call – button
(P. CALL – button on the remote control) to
select the desired preset number.
continued to next page
5467/08-20/EN 04.5.26, 3:06 PM11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood hm 337 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood hm 337 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood hm 337

Kenwood hm 337 User Manual - German, Dutch, French, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info