159035
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
EN
Demonstration mode
The system is equipped with a demonstration
function (only display). The demonstration consists
of sequential change of display and indicators
showing the operations, but the audio itself does
not change. The demonstration function can be
cancelled as follows.
To deactivate the demonstration
•Press and hold rec button (REC/DEMO button
on the remote control) for more than 0.8
seconds during demonstration.
To activate the demonstration
•After turning the power on, press and hold rec
button (REC/DEMO button on the remote
control) for more than 0.8 seconds.
Note:
The demonstration operates automatically when a
power failure has occurred, or the plug of the power
cable has been pulled out while the power was on.
Switching the system on
Press button on the unit or POWER button
on the remote control; or CD, TUNER/band
(TUNER/BAND on the remote control), or TAPE
button and the standby led will go out.
•The system will switch to the last selected
source or the selected source.
Switching the system to standby
mode
Press or button on the unit or POWER button
on the remote control.
Volume control
Press volume
button on the unit (VOLUME +
button on the remote control) to increase or press
volume
button on the unit (VOLUME – button
on the remote control) to decrease the volume
level.
"vol XX" will be displayed. "vol XX" denotes the
volume level.
The volume can be adjusted in 31 steps from
minimum to maximum.
Basic function
To switch off the volume temporarily
Press MUTE button on the remote control.
Playback will continue without sound only system
speaker output and the icon "MUTE" appears on
the display.
To restore the volume, press MUTE button on the
remote control again or adjust the volume.
Sound control
EQ/X-BASS
The sound control system feature enables you to
enjoy special sound effects that have preset
equalizer settings, providing the best music
reproduction.
Press EQ/X-BASS button
To select the desired sound effect: POP, CLASSIC,
ROCK, JAZZ or FLAT.
To switch the X-BASS on/off
Press and hold the EQ/X-bass button on the unit
(EQ/X-BASS button on the remote control).
If X-BASS is switched on, "BASS ON" will appear
then disappear on the display and the icon "X-
BASS" will appear on the display. If X-BASS is
switched off, "BASS OFF" will appear then
disappear on the display and the icon "X-BASS"
will disappear.
Headphones
To listen to your stereo with headphones (not
included), use the 3.5 mm phones jack on the
top of the unit.
5467/08-20/EN 04.5.26, 3:06 PM8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood hm 337 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood hm 337 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood hm 337

Kenwood hm 337 User Manual - German, Dutch, French, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info