706662
8
Zoom out
Zoom in
Previous page
1/153
Next page
f
or saucepan blending
For safest use it is recommended
t
o take the pan off the heat and let
h
ot liquids cool to room
temperature before blending.
U
se the soup blender (if supplied)
t
o quickly process soups etc.,
directly in the saucepan.
A
lternatively use the hand blender.
D
o not use the soup blender
to process uncooked
vegetables.
1 Fit the blender shaft to the power
handle
1
– push to lock.
2 Plug in.
3 Place the food into the beaker or a
similar container, then holding the
beaker steady:
TYPE HDP30 - press the on
button.
TYPE HDP40 - select the required
speed then press the on button.
(Select a low speed for slower
blending and to minimise splashing
and a higher speed or turbo for
faster blending).
To avoid splashing, place the
blade in the food before
switching on.
Don’t let liquid get above the join
between the power handle and
blender shaft.
Move the blade through the food
and use a mashing or stirring
action to incorporate the mixture.
Your hand blender is not
suitable for ice crushing.
If your blender gets blocked,
unplug before clearing.
4 After use release the on or turbo
button. Unplug and press the
release buttons
2
to remove the
blender shaft from the power
handle.
to use the whisk
You can whip light ingredients such
as egg whites; cream and instant
desserts.
Don’t whisk heavier mixtures such
as margarine and sugar - you’ll
damage the whisk.
1 Push the wire whisk into the whisk
collar
3
.
2
Fit the power handle to the whisk
collar. Push to lock.
3 Place your food in a bowl.
D
on’t whisk more than 4 egg
whites or 400ml (
3
4pt) cream.
4 Plug in and press the on button.
T
o whisk on a faster speed, select
a higher speed or press the Turbo
button. Move the whisk clockwise.
TYPE HDP40 - To reduce
splashing, select a low speed then
press the on button.
Don’t let liquid get above the whisk
wires.
5 After use release the on or turbo
button, unplug and dismantle.
to use the chopper (if
supplied)
You can chop meat, vegetables,
herbs, bread, biscuits and nuts.
Don’t chop hard foods such as
coffee beans, ice cubes, spices or
chocolate - you’ll damage the
blade.
1 Remove any bones and cut food
into 1-2cm (
1
2-1”) cubes.
2 Fit the rubber ring base
br
on the
bottom of the chopper bowl. (This
stops the bowl sliding on the
worktop.)
3 Fit the chopper blade over the pin
in the bowl
4
.
4 Add your food.
5 Fit the chopper cover, turn and lock
5
.
6 Fit the power handle to the
chopper cover - push to lock.
7 Plug in. Hold the bowl steady. Then
press the turbo button. Alternatively
press the turbo button in short
bursts to achieve a pulsing action.
8 After use, unplug and dismantle.
processing guide
6
food maximum approx. time
amount (in seconds)
Meat 250g 10-15
Herbs 30g 5-10
Nuts 200g 10-15
Bread 1 slice 5-10
Hardboiled 3 3-5
eggs
Onions 200g pulse
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood HDP401 Triblade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HDP401 Triblade in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info