706668
5
Zoom out
Zoom in
Previous page
1/148
Next page
5
to use the hand blender
l
You can blend soups, sauces, milk
shakes, mayonnaise and baby
food etc.
for beaker blending (if
beaker supplied)
l
Do not fill the beaker more than
2
3
full.
Note
If no beaker is supplied in your
pack, select a suitably sized
container. We would recommend
a tall, straight sided vessel with a
diameter slightly larger than the
foot of the hand blender to allow
movement of the ingredients but
tall enough to prevent splashing.
for saucepan blending
l
For safest use it is recommended
to take the pan off the heat
and let hot liquids cool to room
temperature before blending.
1 Fit the power handle inside
the blender shaft
1
and turn
clockwise to lock.
2 Plug in.
3 Place the food into the beaker or
a similar container, then holding
the beaker steady select the
required speed (select “O” ON for
slower blending and to minimise
slplashing and Turbo for faster
blending).
l
To avoid splashing, place
the blade in the food before
switching on.
l
Do not let liquid get above the join
between the power handle and
blender shaft.
l
Move the blade through the food
and use a mashing or stirring
action to incorporate the mixture.
l
Your hand blender is not
suitable for ice crushing.
l
If your blender gets blocked,
unplug before clearing.
4 After use release the “O” ON or
Turbo button. Unplug and turn
the power handle anticlockwise to
remove the blender shaft from the
power handle.
A
to use the whisk (if
supplied)
l
You can whip light ingredients
such as egg whites; cream and
instant desserts.
l
Do not whisk heavier mixtures
such as fat and sugar - you will
damage the whisk.
1 Push the wire whisk into the whisk
collar
2
.
2 Fit the power handle to the whisk
collar, turn clockwise to lock.
3 Place your food in a bowl.
4
Plug in and press the “O” ON
button.
To whisk on a faster speed press
the Turbo button. Move the
whisk clockwise.
To reduce splashing press the “O”
ON button.
l
Do not let liquid get above the
whisk wires.
5 After use release the “O” ON
or Turbo button, unplug and
dismantle.
B
to use the chopper (if
supplied)
l
You can chop meat, vegetables,
herbs, bread, biscuits and nuts.
l
Do not chop hard foods such as
coffee beans, ice cubes, spices or
chocolate - you will damage the
blade.
1 Remove any bones and cut food
into 1-2cm (
1
2-1”) cubes.
2 Fit the rubber ring base
bm
on
the bottom of the chopper bowl.
(This stops the bowl sliding on the
worktop.)
3 Fit the chopper blade over the pin
in the bowl
3
.
4 Add your food.
5 Fit the chopper cover, turn and
lock
4
.
6 Fit the power handle to the
chopper cover
5
- turn clockwise
to lock.
7 Plug in. Hold the bowl steady.
Then press the Turbo button.
Alternatively press the Turbo
button in short bursts to achieve a
pulsing action.
8 After use, unplug and dismantle.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood HDP106 Triblade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HDP106 Triblade in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info