Manual Kenwood HDM804 Triblade (page 6 of 194) (All languages)

630868

Zoom out

Zoom in

1/194

Place the food into the beaker or a

similar container, then holding the

eaker steady:

elect the required speed using the

variable speed control then press

he ON button.

elect a low speed for slower

blending and to minimise splashing

nd a higher speed or Turbo for

aster blending (refer to

recommended usage chart).

To avoid splashing, place the

blade in the food before

switching on.

Do not let liquid get above the join

between the power handle and

blender shaft.

Move the blade through the food

and use a mashing or stirring

action to incorporate the mixture.

Your hand blender is not

suitable for ice crushing.

If your blender gets blocked,

unplug before clearing.

5 After use release the ON or Turbo

button. Unplug and turn the power

handle anticlockwise to remove the

blender shaft from the power

handle.

to use the whisk

You can whip light ingredients such

as egg whites; cream and instant

desserts.

Do not whisk heavier mixtures such

as fat and sugar - you’ll damage

the whisk.

1 Push the wire whisk into the whisk

collar

2 Fit the power handle to the whisk

collar, turn clockwise to lock.

3 Place your food in a bowl.

4 Plug in and press the ON button.

To whisk on a faster speed, select

a higher speed or press the Turbo

button. Move the whisk clockwise.

To reduce splashing, select a low

speed then press the ON button.

Do not let liquid get above the

whisk wires.

5 After use release the ON or Turbo

button, unplug and dismantle.

o use frother/foaming

tool (if supplied)

Never add ingredients whilst the

ppliance is operating.

Take care when blending hot

liquids, do not process more than

00mls in the beaker.

Do not process more than 400mls

of cold milk in the beaker as it may

overflow as it froths and thickens.

1 Fit the frother/foaming tool shaft to

the power handle. Turn the power

handle clockwise to lock.

2 Start mixing on a low speed and

increase the speed if required.

hints

To avoid splashing place the

frother/foaming tool in the

food to be processed before

switching on. Always ensure

that the bottom of the

frother/foaming tool is fully

submersed in the ingredients

whilst processing.

Always add the liquid ingredients

first.

Always mash fruit to a smooth

puree before adding.

If using syrups and powder mixes

add them just before mixing to

prevent them from sinking to the

bottom.

For best results, all liquid

ingredients should be as cold as

possible.

Milk drinks will taste better if the

milk is ice cold. The colder the milk,

the thicker and more frothy the

drink. Skimmed milk will produce a

frothier drink than semi skimmed or

full fat milk.

Never try to mix frozen fruit or

crush ice.

Break up large lumps of ice cream

before frothing.

to use the chopper (if

supplied)

You can chop meat, vegetables,

herbs, bread, biscuits and nuts.

Do not chop hard foods such as

coffee beans, ice cubes, spices or

chocolate - you’ll damage the

blade.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HDM804 Triblade in the language / languages: All languages as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood HDM804 Triblade Manual

Product: