Manual Kenwood HDM80 serie Triblade (page 7 of 194) (All languages)

630881

Zoom out

Zoom in

1/194

Remove any bones and cut food

into 1-2cm (

⁄2-1”) cubes.

Fit the rubber ring base

n the

ottom of the chopper bowl. (This

stops the bowl sliding on the

orktop.)

Fit the chopper blade over the pin

in the bowl

Add your food.

Fit the chopper cover, turn and lock

6 Fit the power handle to the

chopper cover

- turn clockwise

to lock.

7 Plug in. Hold the bowl steady. Then

press the Turbo button.

Alternatively press the Turbo button

in short bursts to achieve a pulsing

action.

8 After use, unplug and dismantle.

Metal Masherpro™ (if

supplied)

important

Never use the masher in a

saucepan over direct heat. Always

remove the saucepan from the heat

and allow to cool slightly.

Do not tap the masher on the side

of the cooking vessel during or

after mashing. Use a spatula to

scrape excess food away.

For best results when mashing

never fill a saucepan etc., more

than half full with food.

1 Cook hard vegetables and fruit and

drain first before mashing.

2 Fit the masher collar to the masher

shaft by turning in a clockwise

direction until it locks in position

3 Fit either the coarse or fine screen

to the masher shaft – turn

clockwise to lock

4 Turn the masher upside down and

fit the paddle over the central hub

and turn anti-clockwise to secure

(If the collar is not fitted

then the paddle will not

secure in place).

5 Fit the power handle to the masher

assembly - turn clockwise to lock.

6 Plug in.

Place the masher in the saucepan

or bowl etc.

elect a low speed on the variable

ontrol and then press the ON

button (refer to recommended

sage chart).

ove the masher in an up and

down movement throughout the

ix until the desired result is

chieved. Increase the speed if

required.

8 After use release the ON button

and unplug.

9 Turn the power handle

anticlockwise and remove the

masher assembly.

10Remove the paddle from the

masher by turning clockwise.

11Remove the screen by turning anti-

clockwise

and then lift off.

12Unscrew the collar from the masher

shaft.

optional attachment (not

supplied in pack)

Mini chopper - refer to “service and

customer care” section to order.

care and cleaning

Always switch off and unplug

before cleaning.

Do not touch the sharp blades.

Some foods, eg carrot, may

discolour the plastic. Rubbing with

a cloth dipped in vegetable oil may

help to remove discolouration.

Do not use abrasives.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HDM80 serie Triblade in the language / languages: All languages as an attachment in your email.

The manual is 1,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood HDM80 serie Triblade Manual

Product: