70653

Kenwood HB 791 Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
B to use the slicing/shredding disc
●
Never remove the cover until the cutting disc has
completely stopped.
●
Handle the cutting disc with care as it is extremely
sharp.
1 Place the non-slip base onto the bottom of the bowl.
2 Place the drive shaft over the pin in the bowl ᕦ.
3 Holding by the centre grip, place the disc onto the drive
shaft with the appropriate side uppermost ᕧ.
4 Fit the cover and push down to lock in place ᕨ.
5 Fit the power handle and push to lock in place. The
power handle can be fitted with the ON/OFF button
either facing inwards or outwards.
6 Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.
To use the smaller feed tube - first put the large pusher
inside the feed tube.
To use the large feed tube - use both pushers together.
7 Put the food in the feed tube.
8 Select a speed, switch on and push down evenly with
the pusher –never put your fingers in the feed
tube.
9 After use, unplug and dismantle. To remove the lid pull
both locking clips out together and lift ᕩ.
hints
●
Use the shredding side for carrots, potatoes and foods
of a similar texture.
●
Use the slicing side for food items such as carrots,
potatoes, cabbage, cucumber, courgette and onions.
●
Use fresh ingredients.
●
Don’t cut food too small. Fill the width of the feed tube
fairly full. This prevents the food from slipping sideways
during processing. Alternatively use the small feed tube.
●
Food placed upright comes out shorter than food
placed horizontally.
●
There will always be a small amount of waste left on the
disc or in the bowl after processing.
4
processing guide
Tool Food Max Recommended Speed Approx Processing
Qty time (secs)
Knife Blade Lean Meat 500g 5 10 – 30
Herbs 30g 5 10
Nuts 100g 5 20 – 30
One Stage Cake 800g
total wt 4 – 5 10 – 20
Shortcrust Pastry 340g
flour wt 5 20
Disc Firm food such as
carrots or potatoes - 5 -
Softer items such
as cucumbers or
tomatoes - 3 -
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood HB 791 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood HB 791 in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info