113176
3
Zoom out
Zoom in
Previous page
1/110
Next page
to use your steamer
Keep your steamer away from walls
and overhanging cupboards: the
steam could damage them.
Season food after cooking. If
seasoning gets into the water, it
could damage the heating element.
See the cooking guides on pages 6
and 7.
Fill the water tank with water, either:-
1 Lift off the water tank and fill with
cold water. Place the water tank
back onto the base unit and gently
push into place.
or
2 Fit the water tank first, then pour
cold water into the tank.
Always make sure the water is below
the ‘Max’ level marked.
Filtered water is best as it reduces
limescale prolonging the life and
efficiency of your steamer (Kenwood
water filters are widely available).
Don't add anything (even salt or
pepper) to the water – it could
damage the heating element.
To avoid the water level dropping too
low, you can top up during cooking.
Simply pull out the water fill tray and
add fresh water, taking care not to
overfill.
If the water tank becomes empty
during operation, the water empty
indicator light will flash and the
steamer will beep.
3 Sit the drip tray on top of the water
tank.
4 Fit the removable basket trays, rim
uppermost into the baskets (they are
interchangeable). Add the food.
5 Stack the baskets on the base,
starting with the lowest numbered
basket at the bottom and the
highest number at the top . (The
numbers are marked on the basket
handles).
using the rice bowl
Put water and rice in the rice bowl.
Put the rice bowl into a basket. (You
can also cook something in the
other basket(s) if required).
6 Fit the lid, plug in and set the timer.
The light will come on and steam will
soon appear.
boost button
If the boost button is pressed
immediately after switching on the
steamer, this will give an initial burst of
power which will get the steamer up
to temperature more quickly. This will
be accompanied by its light glowing.
The boost function will operate for
approximately 5 minutes and then
the steamer will automatically
continue cooking at the standard
rate. If the boost button is not
selected, the steamer will operate at
the standrd rate for the duration of
the cooking operation.
7When the time is up, a bell will ring,
the light will go out and your steamer
will switch off automatically.
reheat button
At the completion of the cooking
operation, food that has cooled
slightly can be re-heated. Providing
there is water in the tank simply
press the reheat button , its light
will glow and the steamer will
produce steam for approximately 5
minutes.
8 Unplug and clean after use.
hints
Condensation will drip from the
upper basket into the lower basket.
So make sure the flavours go well
together.
Liquid left over in the drip tray is
good for making soup or stock. But
be careful: it will be very hot.
You can also use the rice bowl for
cooking anything in liquid (eg
vegetables in sauces or poaching
fish in water).
Leave gaps between pieces of food.
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FS 620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FS 620 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info