510802

Kenwood FPM800 series Manual

12
Zoom out
Zoom in
Previous page
1/178
Next page
10
troubleshooting guide
Problem Cause Solution
The processor will not operate. No Power. Check processor is plugged in.
No power/indicator light not lit.
Bowl not fitted to power unit correctly. Check bowl is located correctly and
the handle is situated towards the
right hand side.
Bowl lid not locked on correctly. Check that the lid interlock is
located correctly into the handle
area.
The processor will not work
if the bowl and lid are fitted
incorrectly.
Eco function operating. Press either the Auto Button or turn
speed control on, then return to ‘O’
to switch off Eco function.
If none of the above check the
fuse/circuit breaker in your home.
Blender will not operate. Blender not locked on correctly. The blender will not operate if
fitted incorrectly to the interlock.
Blender not assembled correctly. Check blade unit is fully tightened
into the goblet.
Processor stops or slows Overload protection operated. Switch off, unplug and allow the
during processing. Processor overloaded or overheated during appliance to cool down for
operation. approximately 15 minutes.
Maximum capacity exceeded. Refer to the speed chart for
maximum capacities to process.
Power On light flashing rapidly. Normal operation. Check interlocks are engaged
The light will flash if the bowl, lid or blender are correctly.
not fitted to the power unit or not locked in
place correctly.
Power On light flashing slowly. Normal operation.
Food processor left plugged in for over 30 minutes Press either the Auto Button or turn
without being operated and gone into Eco mode. speed control on and then return to
‘O’ to switch off Eco function.
Auto and Power On light flashing. Normal operation. Check interlocks are engaged
The light will flash if the Auto selected but correctly or press the Auto button
interlocks not engaged. to switch off the Auto function.
Blender leaking from blade assembly base. Seal missing. Check seal is fitted correctly and
Seal incorrectly fitted. not damaged. To obtain a
Seal damaged. replacement seal see “service &
customer care”.
Blender seal missing from blade unit when The seal is packed pre-fitted to the blade unit. Unscrew goblet and check that
removed from packaging. seal is fitted to blade unit.
To obtain a replacement seal see
“service & customer care”.
Poor performance of tools/attachments. Refer to hints in relevant “using the attachment” section. Check attachments are
assembled correctly.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FPM800 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FPM800 series in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info