Manual Kenwood FP971 (page 6 of 59) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

463570

Zoom out

Zoom in

1/59

choosing a speed for all functions

Tool/Attachment Function Speed Maximum Capacities

Knife Blade One Stage Cake Mix 1 – 8 2Kg/4lb 8oz total weight

Rubbing fat into flour 3 – 8 500g/1lb 2oz flour weight

Adding water to combine pastry ingredients 3 – 8

Chopping/pureeing/pâtés 8 1Kg/2lb 4oz chopping lean meat total weight

Knife Blade with maxi-blend canopy Soups – start at a low speed and move up to Max 1 – 8 2 litres/3

⁄2 pts

Whisk Egg Whites

auto

2 – 8

Cream 250-750 mls

Dough tool Yeasted mixes 6 – 8 1.3Kg/2lb 12oz total weight

650g/1lb 8oz flour weight

Discs – slicing/shredding Firm food items such as carrots, hard cheese. 5 – 8 –

Softer items such as cucumbers, tomatoes 1 – 3 –

Rasping disc Parmesan cheese, Potatoes for German 8–

potato dumplings

Mini Bowl & knife All processing 8 300g/12oz lean meat total weight

Citrus Press Smaller fruits i.e. limes and lemons 1–

Larger fruits i.e. oranges and grapefruits 2

Centrifugal juicer Juicing firm fruit and vegetables ie apples and carrots auto 1Kg/2lb 4oz apples

800g/1lb 12oz carrots

Juicing soft fruits ie grapes and tomatoes 500g/1lb 2oz

Liquidiser Soups and drinks 8 1.5 litres/2pts 12fl.oz

Mayonnaise 8 3 eggs + 450 ml oil

Frothing milk 8 1 litre/1

⁄2pt

Ice crushing - operate the pulse in short bursts pulse 6 cubes

until crushed to the desired consistency

Multi-mill Processing a range of spices 8 100g/4oz

Grinding coffee beans 8 75g/3oz

Chopping nuts 8 140g/5oz

to use your food processor

Fit the detachable drive shaft onto the power unit ᕡ – push down lightly to

nsure the drive shaft is fully engaged.

2 Then fit the bowl with the handle to the right hand side of the power unit.

lace the handle towards the back and turn clockwise until it locks ᕢ.

Fit an attachment over the drive shaft.

●

Always fit the bowl and attachment onto the processor before adding

ngredients.

Fit the lid ᕣ - ensuring the top of the drive shaft locates into the centre of the

lid.

Fit the pushers to the feed tube – turn the small pusher clockwise to lock in

osition ᕤ.

●

The processor will not operate if the bowl, lid or wide feed tube

usher are not fitted correctly into the interlocks. Check that

he feed tube and bowl handle are situated to the right hand

side.

Plug in. The Power On light will come on and flash until the bowl and lid are

itted correctly. Select one of the following options: -

Auto Button – the light will come on when the Auto Button is pressed and the

ptimum speed for the attachment will be automatically selected.

peed Control – manually select the required speed (Refer to the

recommended speed chart).

ulse – use the pulse (P) for short bursts. The pulse will operate for as long as

he control is held in position.

At the end of processing turn the speed control to the 0 position or if using

he Auto press the button and the light will go out.

●

The Power On light will flash if either the lid, bowl or wide feed

ube are not fitted.

●

he Power On and Auto lights will flash if the Auto is selected

but the interlocks are not engaged.

●

o not use the lid to operate the processor, always use the

n/off control.

●

The Auto button will not operate if a speed is selected on the

peed control.

●

lways switch off and unplug before removing the lid.

8 Reverse the above procedure to remove the lid, attachments and bowl.

important

●

our processor bowl is not suitable for crushing or grinding coffee beans, or

onverting granulated sugar to caster sugar.

●

When adding almond essence or flavouring to mixtures avoid contact with the

lastic as this may result in permanent marking.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FP971 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kenwood FP971 Manual

Product: