630934

Kenwood FP126 Manual

7
Zoom out
Zoom in
Previous page
1/78
Next page
slicing plate
I
f necessary cut food to fit the feed tube. Core
f
oods such as apples and peppers. Pack the food
in an upright position in the feed tube. The height
s
hould be slightly shorter than the feed tube.
U
sing the pusher, push down with an even
pressure whilst the machine is running.
hints
G
Use fresh ingredients.
G
Don’t cut food up too small. Fill the feed tube fairly
full, this prevents food from slipping sideways
during processing.
G
When slicing or shredding: food placed upright
comes out shorter than food placed horizontally.
G
After using a cutting plate there will always be a
small amount of waste on the plate or in the food.
G
Do not allow food to build up to the underside of
the plate - empty regularly.
G
Push food down the feed tube using an even
pressure.
maxi blend canopy
When blending, use the maxi blend canopy in
conjunction with the knife blade. It allows you to
increase the liquid processing capacity of the bowl
and improve the chopping performance of the
blade.
1 Place the canopy into the bowl over the knife
blade - do not push down .
2 Fit the lid .
citrus press
The citrus press is used to juice citrus fruit ie
oranges, lemons, limes and grapefruits.
1 Fit the bowl onto the processor. Add the strainer
and turn clockwise until the fin on the strainer
aligns with the mark on the processor body .
2 Attach the cone onto the drive shaft turning until it
drops all the way down .
3 Cut the fruit in half. Switch on and press the fruit
onto the cone.
care & cleaning
G
Always switch off and unplug before cleaning.
G
Handle blades and cutting plates with care - they
are extremely sharp.
G
Some foods may discolour the plastic. This is
perfectly normal and won’t harm the plastic or
affect the flavour of your food. Rub with a cloth
dipped in vegetable oil to remove the
discolouration.
power unit
G
W
ipe with a damp cloth, then dry. Ensure that the
i
nterlock area is clear of food debris.
G
Don’t immerse the power unit in water.
G
W
rap excess cord around the bracket at the back
o
f the appliance.
all other parts
G
Wash by hand, then dry.
G
Alternatively they can be washed on the top rack
of your dishwasher. A short low temperature
programme is recommended.
service & customer care
G
If the cord is damaged it must, for safety reasons,
be replaced by KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
G
using your appliance or
G
servicing, spare parts or repairs
G
Contact the shop where you purchased your
appliance.
G
Designed and engineered by Kenwood in the UK.
G
Made in China.
IMPORTANT INFORMATION FOR CORRECT
DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product must not be
disposed of as urban waste.
It must be taken to a special local authority
differentiated waste collection centre or to a dealer
providing this service.
Disposing of a household appliance separately
avoids possible negative consequences for the
environment and health deriving from inappropriate
disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and
resources. As a reminder of the need to dispose of
household appliances separately, the product is
marked with a crossed-out wheeled dustbin.
5
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood FP126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood FP126 in the language / languages: All languages as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info