136624
15
Zoom out
Zoom in
Previous page
1/48
Next page
DVF-3070 (EN/E,T,X,Y)
Set Up functions
15
Preparations
AUDIO SETUP
AUDIO OUT
SPDIF/RAW
LPCM OUTPUT
DYNAMIC
LPCM 48k
LPCM 96k
In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96
kHz signal. Depending on the disc, output of a 96 kHz signal may be prohibited. In such a case, the output will be
converted down to a 48 kHz signal.
At the time of Dolby digital DVD playback, the differece of the maximum volume and the minimun volume are
compressed. Adjustment is possible in 8 steps, and the range is largest (compression ratio 0) at the time of "OFF" and
smallest (large compression ratio) at the time of "FULL". ( OFF )
Choose "S-VIDEO" in case of connection to the S-VIDEO terminals on the rear, choose "RGB" in case of connection to
the AV terminal or choose "COMPONENT" in case of connection to COMPONENT terminal. Output will not be made to
the not selected terminals. (0!) ( S-VIDEO )
Choose the language for the AUDIO output.
Choose the language for SUB TITLE.
Choose the language for the menu recorded on the DISC.
This resets all settings, except for PARENTAL and PASSWORD, to the factory defaults.
SPDIF/PCM
PREFERENCES
VIDEO OUTPUT
AUDIO
SUB TITLE
DISC MENU
PARENTAL
This can restrict playback of adult-oriented DVD discs that you do not want to be seen by children.
However, even when a DVD disc is marked "Adult-oriented" or so on the label, its viewing cannot be
restricted unless the restriction level is recorded in the disc itself. ( 8 )
Parental lock level;
Level 8: All DVDs can be played back.(Factory preset)
Level 7 to 2: DVDs for general audiences/children can be played back. (DVDs for adults are prohibited.)
Level 1: DVDs for children can be played back. (DVDs for adults/general audiences are prohibited.)
PASSWORD
The password for PARENTAL setting, change, cancellation, etc. is set.
DEFAULTS
This selects the format of the audio output from the DIGITAL OUT terminal.
This selects the clock frequency for linear PCM output.
Choose this when connecting to an amplifier with built-in Dolby digital or DTS decoder.
When a DVD recorded with Dolby digital or DTS is played back, a bitstream signal will be put out. When a disc
recorded with linear PCM is played back, a linear PCM signal will be put out.
Choose this for PCM output.
When a DVD recorded with Dolby digital is played back, output will be made converted to 2-channel PCM. In
case of a DVD recorded with DTS, output will be made as bitstream.
Sets the linear PCM output to 48 kHz.
Even in case of 96 kHz digital signal, DVD will deliver 48 kHz signal out.
( ENGLISH *)
( ENGLISH *)
( ENGLISH *)
When the language marked with an asterisk (*) is specified by the disc, that specification has priority.
*5357/14-25/EN 03.5.20, 10:24 AM15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood dvf 3070 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood dvf 3070 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info