683035
48
Zoom out
Zoom in
Previous page
1/49
Next page
Wichtiger Hinweis zur Software
MD5 utility
/* crypto/md5/md5.h */
Copyright (C) 1995-1998 Eric Young
(eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written
by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform
with Netscape's SSL.
This library is free for commercial and non-com-
mercial use as long as the following conditions are
adhered to. The following conditions apply to all
code found in this distribution, be it the RC4, RSA,
lhash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is
covered by the same copyright terms except that
the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such
any Copyright notices in the code are not to be
removed.
If this package is used in a product, Eric Young
should be given attribution as the author of the
parts of the library used.
This can be in the form of a textual message at
program startup or in documentation (online or
textual) provided with the package.
Redistribution and use in source and binary forms,
with or without modification, are permitted provid-
ed that the following conditions are met:
1. Redistributions of source code must retain the
copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce
the above copyright notice, this list of conditions
and the following disclaimer in the documen-
tation and/or other materials provided with the
distribution.
3. All advertising materials mentioning features or
use of this software must display the following
acknowledgement:
This product includes cryptographic software
written by Eric Young (eay@cryptsoft.com)”
The word cryptographic’ can be left out if the
routines from the library being used are not
cryptographic related :-).
4. If you include any Windows specific code (or
a derivative thereof) from the apps directo-
ry (application code) you must include an
acknowledgement:
This product includes software written by Tim
Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR
A P
ARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE-
CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCL
UDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIA-
BILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
The license and distribution terms for any publicly
available version or derivative of this code cannot
be changed. i.e. this code cannot simply be copied
and put under another distribution license [includ-
ing the GNU Public License].
---------------------------------------------------------------------
CRC utility
COPYRIGHT (C) 1986 Gary S. Brown. You may use
this program, or code or tables extracted from it, as
desired without restriction.
First, the polynomial itself and its table of feedback
terms. The polynomial is X^32+X^26+X^23+
X^22+X^16+X^12+X^11+X^10+X^8+X^7+
X^5+X^4+X^2+X^1+X^0
Note that we take it “backwards” and put the
highest-order term in the lowest-order bit. The
X^32 term is “implied”; the LSB is the X^31 term,
etc. The X^0 term (usually shown as “+1”) results in
the MSB being 1.
Note that the usual hardware shift register imple-
mentation, which is what we're using (we're merely
optimizing it b
y doing eight-bit chunks at a time)
shifts bits into the lowest-order term. In our imple
-
mentation, that means shifting towards the right.
Wh
y do we do it this way? Because the calculated
CRC must be transmitted in order from highest-order
term to lowest-order term. UARTs transmit characters
in order from LSB to MSB. By storing the CRC this way
we hand it to the UART in the order low-byte to high-
byte; the UART sends each low-bit to high-bit; and
the result is transmission bit by bit from highest- to
Wichtiger Hinweis zur Software
48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: German as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - English - 25 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info