683035
10
Zoom out
Zoom in
Previous page
1/25
Next page
Before Using the Driving Support Functions
7.
Operate the [ ] and [ ] buttons to
adjust the guide line (the white line)
so that it is lined up with the tip of the
engine hood.
The explanations on the screen turn off when a
button is operated.
Adjust as shown on the diagram.
2
1
1
8.
Press the [MENU/OK] button to complete
the adjustment.
z
If the engine hood does not appear on the
screen, adjust so that the guide line (the
white line) is lined up with the road surface
at a point about 3 meters forward when the
vehicle is stopped.
z
The driving support function is set to “OFF”
upon purchase. ( P. 34)
Inserting and ejecting SD cards
Turn the camera's power off, then insert the SD card
into SD card slot 1, pressing in until a click is heard.
Be sure to insert the card in the proper direction.
When inserting an SD card in SD card slot 2, do
so in the same way.
To eject the card, first turn the camera's power
off, press the SD card in so that it pops out some,
then pull it out.
z
Be sure to format the SD card on this unit.
z
When an SD card is formatted, all the files
on it, including protected files, are deleted.
z
The camera will not work properly unless an
SD card is inserted in SD card slot 1.
z
If you remove an SD card without turning
the camera's power off, the files recorded on
the card could be damaged or lost.
Turning the power on and off
When the vehicle's engine key is turned to ACC” or
“ON”, the camera's power turns on and continuous
recording starts. When the engine key is set to
“OFF”, the camera's power turns off.
Turning the power on and off
manually
When the [MENU/OK] button is pressed and held
for at least 3 seconds while the camera's power is
on, the power turns off.
When the [MENU/OK] button is pressed and held
for over 1 second while the camera's power is off,
the power turns on.
z
The power cannot be turned on manually
when the engine key is set to “OFF”.
Formatting SD cards
To use an SD card, first format it on the camera.
1. Insert the SD card into SD card slot 1
or SD card slot 2.
2. Press the [MENU/OK] button.
The menu is displayed.
3. Operate the [ ] and [ ] buttons to
select <SD card menu>, then press the
[MENU/OK] button.
2
1
1
4. Operate the [ ] and [ ] buttons
to select <Format SD card (Slot1)> or
<Format SD card (Slot2)>, then press
the [MENU/OK] button.
2
1
1
Before Using
continued
18 19
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kenwood DRV-830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kenwood DRV-830 in the language / languages: English as an attachment in your email.

The manual is 12,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kenwood DRV-830

Kenwood DRV-830 User Manual - German - 49 pages

Kenwood DRV-830 User Manual - Dutch - 52 pages

Kenwood DRV-830 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info